Incremental path

Technology levels and steps of the incremental path
Level 0	side products
Introduction of total positional control	xxx
Level I	side products
switch-over to stiffer materials	xxx
Level II	side products
introduction of practically perfect vacuum	xxx
Level III	basis for products advanced products maybe-products

Up: Pathways to advanced APM systems

The incremental path towards advanced APM systems describes a desired process of slowly increasing technological capabilities (tools making better tools) with avoidance of loss of a strong orientation towards the far term goal of the stiff nanomachinery in gem-gum technology. This translates into starting off by using soft nanomachines to the fullest to get away from soft nanomachines ASAP.

The incremental path towards advanced APM systems is complementary to the direct path. The direct path to advanced APM systems in comparison describes a desired process of jumping to the advanced far term goal ASAP without significant detours. It is specifically focused on early usage of scanning probe microscopy for mechanosynthesis of diamond (or silicon) with throughput levels that are significant enough for the bootstrapping of a gem-gum factory. Following the direct path alone may be problematic.

• Sometimes a direction that on first inspection looks like it would lead fast to the goal actually does lead to it very slowly (or even not at all).
• Sometimes a direction that on first inspection looks as if it would lead only very slowly to the goal actually would lead to the goal fastest (which might still be slow).

This was the reason for the introduction of the distinction between direct path and incremental path.
Details on the critics towards the direct path will be located on the "direct path"-page.

High level map for the incremental path

Possible map for the incremental path.

This map here plots:

• technology levels by use/control of material and means of assembly against ...
• assembly levels as in the degree to which hierarchical selfassembly has been achieved.

The starting-point of technological development/progression is the bottom-most asterisk-star.
Green asterisks mark ares where some results have already been achieved.

The window of escape

The argument this map-diagram here is trying to justify is that there might be kind of a
window of escape between the blockades in pathways of development (red, orange, and yellow) .

Blockades:

• The red, orange, and yellow stars tagged with "redundant" mean:
  Everything that positional assembly can do here selfassembly can do equally well (yellow) or better (red).
• The red, orange, and yellow stars tagged with "too big to diffuse" means:
  Thermally driven selfassembly faces increasing problems due larger parts moving slower.

Starting out to the left right away is both

• technically hardly possible (noncomposable primitive selfassemblies hardly can introduce positional assembly) and
• economically not at all motivatable (due to the positional assembly redundancy blockade mentioned above)

Degree of directness of the indirect path

Note that there is kind of a degree of directness in the indirect path.
Directness in the sense of:

• How early/aggressively one attempts to take a hard tun left in the map-diagram.
• How early/aggressively one attempts to get to a positional assembly kinematic loop with proper separation of concerns
• How tightly one attempts to circumnavigate the positional assembly redundancy blockade.
• How far to run up against the diffusion slowdown blockade before taking the left-turn

Depending on the directness of the indirect path further sub approaches of the indirect path can be identified:

• Early-most leftward-turn: Catalysis construction kit approach
• Later leftward-turn: Printer approach (See: Foldamer printer)
• Very late leftward-turn: Robo approach

Self-assembly – Climbing selfassembly levels

State of progress

A good place to look at is foldamer R&D specifically structural DNA nanotechnology.
Several noteworthy milestones have already been reached.

Metrics for progress

Bad metrics for progress (superficially impressive):

• symmetry of self-assembles
• size of self-assemblies

Good metrics for progress (more subtle):

• degree of termination control
• stiffness originating from geometry of formed structures

Pushing against the limits of artificial self-assembly

What are the limitations to scaling up selfassembly?

• (A) many blocks taking more time to find each other
• (B) bigger blocks diffusing more slowly – The diffusion slowdown blockade
• (C) limits in implementability of sets of complementary interfaces where correct pair bind well but wrong pairs do not
• (D) wrong assembles not coming apart again – kinematic traps
• ... and certainly more

Counterstrategies:

• (1) using longer chain molecules to increase local effective concentration
  – so done in some forms of SDN and always present in single chain self folding.
• (2) Squigglesembly – using iterative self-assembly to getaway with small sets of complementary interfaces
• (3) Circumsembly – using parallel selfassembly pathways to circumvent selfassembly errors (that may be tolerable)
• (4) algorithmic selfassembly ...
• (5) going for nonthermal self-assembly at larger scales
• ... and certainly more

Base material – Climbing technology levels

The recently developed self assembling structural DNA nanotechnology and similar reliably designable foldamer structures might be a good starting point from technology level 0.

• By introducing robotic (more precisely stereotactic) control one could reach something like a "block level precision robotic technology" technology level I from there in a first step.
  
• In a second step one could change to e.g. Pyrite or Silica technology level II as building material to increase structural stiffness, reduce vibration amplitudes and get thus more placing accuracy.
  
• And finally in a third step one could switch from fluid phase to vacuum so that carbon and silicon can be assembled technology level III.

This very crude temporal outline is by no means the only possible way to go to eventually arrive at positional atomic precision.
There may be shortcuts or other paths. (See: Direct path)

Literature

In Appendix II of the book "Radical Abundance" it is proposed to go through several levels of APM technology to reach advanced (positional atomic precision & diamondoid) APM. These levels will serve as a rough guideline for the structuring of this Wiki. In "Nanosystems" technology stages are mentioned beginning with section 16.5.2. (written before the emergence of structural DNA nanotechnology).

Terminology

Since a nanofactory at the endpoint of an incremental path will inherit the capability of handling at least the materials of one generation before it,
it may be better to call the products gemoid instead of diamondoid this terminology would make it more clear that gemstone like bio-minerals like quartz are included.

Paths that are treated separately because its harder to find a concrete goal for them

Note that the behavior of mobile electrons at the nanoscale is not as easily predictable as the behavior of mechanics at the same scale thus there's less exploratory engineering for nanoelectronics than nanomechanics. See:

• non mechanical technology path (including nanoelectronics)
• brownian technology path. (including things like synthetic biology)

[Todo: improve article quality]

Reasons for the order of introduction of capabilities

A necessary prerequisite for the second major step (that is: going from soft atomically precise but not necessarily positionally atomically precise materials to stiffer positionally atomically precise ones) is: the first major step (that is the introduction of the capability to pick and place building blocks at featureless sites.) This is a prerequisite since stiffer building materials (like bio-minerals) are more featureless and thus uncontrollable with self assembly (or at least much harder to control).

Terminology for early systems

In Erics blog (2018-11-10) early foldamer based systems were referred to as:
"modular molecular composite nanosystems (MMCNs)"
One could also perhaps call them:
"coarse-block atomically precise systems"

Related

• Technology levels
• Pathways to advanced APM systems
• Pathway controversy
• Bridging the gaps

External links

• Slides: "Toward Modular Molecular Composite Nanosystems" -- K. Eric Drexler, PhD -- U.C. Berkeley -- 26 April 2009 -- [1]