Foldamer printer approach (incremental path)

From apm
Revision as of 13:39, 16 September 2022 by Apm (Talk | contribs) (basic page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This article is a stub. It needs to be expanded.
Possible map for the incremental path.

This is about a possible sub-branch of the incremental path.

The idea here is to scale up self-assembly capabilities of various foldamer technologies just far enough to make just the very basic quite minimal viable 3-DOF positional assembly possible. To make the problem even more simple an achievable only can limit the design requirements to ony depassivation and wash-in.
See: Site-specific workpiece activation (Like in the: Catalysis construction kit approach).

That corresponding to moving to the right in the diagram just enough that going turning lect becomes possible without going to one-off-special-purpouse devices.

How would that look like in reality?

See page [[]Foldamer printer]] for details.

Relation to positional assembly

This would introduce almost fully general purpose bottom up positional assembly.
And weak one at that (Site-specific workpiece activation).

Top down positional assembly is not involved in this scenario.
Product of printer could may or may not be handled top down ...

Related