Dangers

From apm
Revision as of 08:40, 13 April 2021 by Apm (Talk | contribs) (added == Possible classification == === old:ABC vs new:CBRN === (plus quite a bit of content))

Jump to: navigation, search

This is a condensed down list of the worst things atomically precise manufacturing and technology could be misused for.
The reader might want to not take in all at once and take a brake with more optimistic outlooks.

Note that one might argue that both the worst nightmares and the brightest utopias are both extreme cases that are extremely unlikely to come true in their full extent. The reality most likely lies somewhere in-between. The question is: How far can we push civilization from the generally considered bad stuff to the generally considered good stuff. The opportunities that atomically precise technology will bring should hopefully significantly outbalance the dangers presented here.

A word of warning: In many cases panic, alarmism and ensuing overreaction (e.g. total bans) with too limited understanding of the full breath of the situation can have worse effects than the danger would have brought if no action had been taken at all. This by itself could be added to the dangers (a "meta danger").

Every technology powerful enough to bring significant advances always comes with dangers involved too.
The plethora and level of scaryness of the dangers listed here is just one place where the (neutral and impartial) power of atomically precise manufacturing technology shows.

List of possible dangers that could arise with the rise of advanced AP technology

Waste

Albeit advanced APM has the potential to be an absolutely clean technology in production (since its primary waste products are only hot air and warm water) advanced APM would be a unprecedented wasteful technology in disposal if not built correctly since the products themselves must be considered waste once they become obsolete - and the products will become obsolete fast as we can see with today's pace of software improvement. Also the global production rate in mass or volume will be bigger since production will become so widespread and accessible.

  • Recycling is not an option its an obligation that has to be thought of before creating advanced APM systems that can produce products that do not biodegrade in reasonable timespans.

Related to the waste problem

  • recomposable microcomponents
  • The two recycling classes of products: The ones that can be completely burned to gasses (C,H,O,N,S) &
    The ones that produce slacks when burned (containing too: Si,Al,Ti,Fe,Na, and the wole remaining periodic table). See: Diamondoid waste incineration.
  • amorphous slack of various elements is hard to deal with since blind atomically precise disassembly of unknown structures is a very hard problem.
  • there's no AP disassembly (at least its a lot harder to do than AP assembly)

Possible classification

old:ABC vs new:CBRN

Please do not use the old (and outdated) classification classification ABC.
ABC was standing for: Atomic-hazard, Biohazard, Chemical-hazard.
Why? Because:

  • The benefit of easy remembrance does not outweigh
  • the didactic damage it is capable to do and that it may have done.

Todays (2021 and before) experts want to see

  • the old acronym ABC being superseded by
  • the new acronym CBRN.

CBRN standing for: Chemical, Biological, Nuclear, Radiological.
CBRN is much less mnemonically helpful than ABC so opposing the use of the old its use may be a bit of a fight against windmills.
Still acronym replacement is pushed because but it stops a large group of non technical people from
confusing atoms with nuclei and consequently from making ill informed judgements e.g. when voting.

About the current (2021-04) English wikipedia pages abut "weapons of mass destruction":

  • the English page does not even mention the old acronym and why it is so bad. Bad.
  • the German page has a bold note on the old acronym right in the second paragraph of the intro. Better.

This may also be especially relevant for the German language room because it seems that
there people still seem to preferably call nuclear power-plants by the misleading name "atomic power-plants".

The unfortunately still common confusion between atoms and nuclei is also a problem for the
now newest adopted title for the technology that this wiki is about.
That is "atomically precise manufacturing (and technology)"

A better term may have been "chemical bond precise manufacturing (and technology)"
but unfortunately in the book "Radical Abundance" the term "atomically precise manufacturing (and technology)"
was introduced the atom nucleus confusion trapdoor was not averted by the author.

Related

External links