Difference between revisions of "Diamondoid heat pump system"
m |
|||
| Line 1: | Line 1: | ||
| − | + | With [[technology level III|advanced APM]] heat pumps for reaching liquid nitrogen or helium temperatures can probably be easily created. | |
They could be made into desktop scale devices with nothing more than a power connection | They could be made into desktop scale devices with nothing more than a power connection | ||
| − | or more importantly integrated into nanofactories to gain more reliable operation with lower error rates. | + | or more importantly integrated into nanofactories to gain more reliable [[mechanosynthesis|mechanosynthetic]] operation with lower error rates. |
The '''air refrigeration cycle''' also known as Bell Coleman cycle or reverse Brayton cycle | The '''air refrigeration cycle''' also known as Bell Coleman cycle or reverse Brayton cycle | ||
| Line 13: | Line 13: | ||
# transport compressed gas inside through the thermal isolation layer | # transport compressed gas inside through the thermal isolation layer | ||
# expand gas in thermal contact to the isolated volume | # expand gas in thermal contact to the isolated volume | ||
| − | # let the now absent expansion heat be filled from the chamber | + | # let the now absent expansion heat be filled from the chamber (suck it cold) |
# transport expanded gas throug isolation layer | # transport expanded gas throug isolation layer | ||
# repeat the cycle | # repeat the cycle | ||
To reach liquid hydrogen or helium temperatures | To reach liquid hydrogen or helium temperatures | ||
| − | the compressed hydrogen/helium must be cooled below its inversion point | + | the compressed hydrogen/helium must be cooled below its [http://en.wikipedia.org/wiki/Inversion_temperature inversion point] |
| − | or else gas | + | or else the gas will heat up instead of cooling down when expanded. |
A two stage design with good thermal contact is then needed. | A two stage design with good thermal contact is then needed. | ||
| − | Gasses can be handled safely (without explosion hazard) in small small DMME capsules with lockable pistons | + | Gasses can be handled safely (without explosion hazard) in small small [[diamondoid molecular elements|DMME]] capsules with lockable pistons. |
When oxid-ceramic diamondoid materials are used dry air instead of pure nitrogen should be safely usable. | When oxid-ceramic diamondoid materials are used dry air instead of pure nitrogen should be safely usable. | ||
| − | To keep the capsules small in spite of the high compression ratios the capsules could employ three pistons | + | To keep the capsules small in spite of the high compression ratios the capsules could employ three consecutively acutated pistons each compressing the enclosed gas by a factor of ten. |
| − | each compressing the enclosed gas | + | |
Since the capsules must be moved between two locations seperated by macroscopic distance | Since the capsules must be moved between two locations seperated by macroscopic distance | ||
Revision as of 23:37, 27 January 2014
With advanced APM heat pumps for reaching liquid nitrogen or helium temperatures can probably be easily created. They could be made into desktop scale devices with nothing more than a power connection or more importantly integrated into nanofactories to gain more reliable mechanosynthetic operation with lower error rates.
The air refrigeration cycle also known as Bell Coleman cycle or reverse Brayton cycle (see: heat pumps in general and "gas cycle diagram" ) is nice for diamondoid AP systems since high compression ratios are easily archivable and liquid nitrogen temperatures can be archived just by using ambient air
A classical gas cycle is like follows:
- compress gas in thermal contact to the heat radiator to fluid densities (around ~1000bar)
- let the generated compression heat dissipate into the environment
- transport compressed gas inside through the thermal isolation layer
- expand gas in thermal contact to the isolated volume
- let the now absent expansion heat be filled from the chamber (suck it cold)
- transport expanded gas throug isolation layer
- repeat the cycle
To reach liquid hydrogen or helium temperatures the compressed hydrogen/helium must be cooled below its inversion point or else the gas will heat up instead of cooling down when expanded. A two stage design with good thermal contact is then needed.
Gasses can be handled safely (without explosion hazard) in small small DMME capsules with lockable pistons. When oxid-ceramic diamondoid materials are used dry air instead of pure nitrogen should be safely usable.
To keep the capsules small in spite of the high compression ratios the capsules could employ three consecutively acutated pistons each compressing the enclosed gas by a factor of ten.
Since the capsules must be moved between two locations seperated by macroscopic distance the design (and the process steps) will be spread over multiple microcomponents
The most difficult part is the thermal thermal isolation layer since diamond is pretty much the worst thermal isolator conceivable.
