Difference between revisions of "Convergent mechanical actuation"
m |
m (Apm moved page Confluence of mechanical actuation to Convergent mechanical actuation: generally seems better terminology) |
||
| (14 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{site specific definition}} | ||
For adding up nanoscopic movement (speed / angular speed and force / torque) generated by [[chemomechanical converters|chemical]] electrical or an other energy source to macroscopic movement there are multiple methods conceivable: | For adding up nanoscopic movement (speed / angular speed and force / torque) generated by [[chemomechanical converters|chemical]] electrical or an other energy source to macroscopic movement there are multiple methods conceivable: | ||
| − | * [[interfacial | + | * [[interfacial drive]] ''(invented name)'' |
| − | * | + | * [[artificial motor-muscles]] |
| + | * hierarchical axles ''(invented name)'' | ||
* ... | * ... | ||
| Line 9: | Line 11: | ||
An [[interfacial drive]] has the same basic structure as an [[infinitesimal bearings|infinitesimal bearing]] | An [[interfacial drive]] has the same basic structure as an [[infinitesimal bearings|infinitesimal bearing]] | ||
| − | with the layer structure made so much bigger that | + | with the layer structure made so much bigger that energy generation (conversion) and possibly [[energy storage cells|storage]] can be incorporated. |
| + | Interfacial drives create shear movement (transversal). The volume of the material stays constant. | ||
| + | |||
| + | == Artificial motor-muscles == | ||
| + | |||
| + | Details about them can be found on the "[[artificial motor-muscles|mokel]]" page. | ||
| + | They can be used to create axial (longitudinal) shape changes. In operation the materials volume changes. | ||
== Hierarchical axles == | == Hierarchical axles == | ||
| − | A system of | + | A system of hierarchical axles would be a macroscopic axle by driven by '''n<sub>1</sub>''' sub axles each of which is driven by '''n<sub>2</sub>''' sub sub axles and so forth down to the lower physical size limit meaning axles built out of single [[diamondoid molecular elements|DMMEs]]. |
| − | This design is more complicated than an [[interfacial drive]] since it has a much more | + | This design is more complicated than an [[interfacial drive]] since it has a much more complex fractal geometry and many layers at different size scales calling for different designs. All the axles from the third or fourth hierarchical layer from the bottom upwards will need to be supported by [[infinitesimal bearings]]. |
Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion ''(drive contact)'' is another difficult problem. | Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion ''(drive contact)'' is another difficult problem. | ||
To avoid gearing down to too low speeds some stages need to gear up as a countermeasure. | To avoid gearing down to too low speeds some stages need to gear up as a countermeasure. | ||
There are more than eight inter-meshing gear contacts in series from the generators to the macroscopic load (or vice versa) | There are more than eight inter-meshing gear contacts in series from the generators to the macroscopic load (or vice versa) | ||
| − | thus this design only | + | thus this design only may make sense with the exceptionally high efficiency of nanomechanical gears compared to macroscopic gears. |
| + | |||
| + | [[Category:Technology level III]] | ||
| + | [[Category:Site specific definitions]] | ||
Latest revision as of 18:53, 18 May 2021
For adding up nanoscopic movement (speed / angular speed and force / torque) generated by chemical electrical or an other energy source to macroscopic movement there are multiple methods conceivable:
- interfacial drive (invented name)
- artificial motor-muscles
- hierarchical axles (invented name)
- ...
Interfacial drive
An interfacial drive has the same basic structure as an infinitesimal bearing with the layer structure made so much bigger that energy generation (conversion) and possibly storage can be incorporated. Interfacial drives create shear movement (transversal). The volume of the material stays constant.
Artificial motor-muscles
Details about them can be found on the "mokel" page. They can be used to create axial (longitudinal) shape changes. In operation the materials volume changes.
Hierarchical axles
A system of hierarchical axles would be a macroscopic axle by driven by n1 sub axles each of which is driven by n2 sub sub axles and so forth down to the lower physical size limit meaning axles built out of single DMMEs.
This design is more complicated than an interfacial drive since it has a much more complex fractal geometry and many layers at different size scales calling for different designs. All the axles from the third or fourth hierarchical layer from the bottom upwards will need to be supported by infinitesimal bearings. Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion (drive contact) is another difficult problem.
To avoid gearing down to too low speeds some stages need to gear up as a countermeasure. There are more than eight inter-meshing gear contacts in series from the generators to the macroscopic load (or vice versa) thus this design only may make sense with the exceptionally high efficiency of nanomechanical gears compared to macroscopic gears.
