Difference between revisions of "Superlubricity"

From apm
Jump to: navigation, search
m
(removed image of 3d printed modes - in now on page Atomically precise slide bearing which is now linked to)
 
(66 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:Drexlers Big Bearing - photo of 3D printed model.JPG|thumb|625px|Erik K. Drexlers superlubricating "big bearing" - This is a photo of a 3D printed model. See:  http://www.thingiverse.com/thing:631715]]
+
[[File:0315bearingSums.gif|thumb|400px|Graphic by Eric K. Drexler -- Citation: "Symmetric molecular bearings can exhibit low energy barriers that are insensitive to details of the potential energy function" <ref name="pdrag"> '''Drag mechanisms in symmetrical sleeve bearings:''' Drexler, K. E. (1992) ''[[Nanosystems]]: Molecular Machinery, Manufacturing, and Computation.'' Wiley/Interscience, pp.290–293.</ref>]]
 +
[[File:Strained-shell-sleeve-bearing.gif|300px|thumb|right|A simulation made with the software "Nanoengineer-1" <br> Author Eric K. Drexler – An '''[[atomically precise slide bearing]]'''.]]
 +
[[File:Nanotube-based-thermal-nanomotor1.jpg|400px|thumb|right|Coaxial nanotube bearing based nano-motors have been experimentally built and tested. While still very crude they already show very little friction. Much unlike the problems with [[stiction]] and wear in photolithographically produced [[MEMS systems]]. – Coaxial nanotubes are quite similar in characteristics to [[crystolecule]] bearing so the working nanotube bearings give '''experimental evidence for [[crystolecular element]]s working with low friction an [[wear free]]'''.]]
 +
Up: [[Friction in gem-gum technology]]
  
−
'''Superlubrication''' is a '''state of extremely low friction''' that occurs when '''two atomically precise surfaces slide along each other''' in such a way that the '''"atomic bumps" do not mesh''' or more precisely when the lattices distances projected in the direction of movement are maximally incommensurate. It works at all (non destructive) temperatures includung 300K room temperature. Superlubricating bearings are generally '''wear free'''. Their dominating damage mechanism is [[radiation damage|ionizing radiation]] or thermal destruction.
+
'''Superlubricity''' (or '''superlubrication''') is a '''state of extremely low friction''' that occurs when '''two atomically precise surfaces slide along each other''' in such a way that the '''"atomic bumps" do not mesh'''. <br>
 +
More precisely: When the lattices distances projected in the direction of movement are maximally incommensurate.
  
−
The occurring friction is 2000 to 100000 times smaller than movement in water which is present e.g. in nanobiology.  
+
== Key aspects of superlubricity ==
−
Note that diffusion transport by concentration gradients does not make biological systems more efficient.  
+
 
−
One expends the same free-energy cost as with any other way of driving motion. (see external links)
+
* '''Present in [[gem-gum-tec]]:''' Superlubricity is present in [[crystolecule]] bearings which are essential [[molecular machine element]]s in [[gemstone metamaterial technology]].
 +
* '''Eternally wear fee:''' Superlubricity features no "collinding mountainranges" at the nanoscale that can mutually shear off their tips. Thus superlubricating bearings are fully '''[[the ultimate construction toy|wear free]]'''. The dominating damage mechanism of superlubricating bearings is [[radiation damage|ionizing radiation]] or thermal destruction in extreme conditions (melting, evaporationg, hot chemical dissolution, ..). There is damage over time but there is no wear from mechanical friction (and load) over time.
 +
 
 +
== Examples exhibiting superlubricity ==
  
−
Examples exhibiting superlubrication:
 
 
* two coplanar sheets of graphene rotated to one another to minimally mesh
 
* two coplanar sheets of graphene rotated to one another to minimally mesh
−
* two appropriately chosen tightly fitting coaxial nanotubes (experimantally demonstrated) '''[Todo: add ref]'''
+
* two appropriately chosen tightly fitting coaxial nanotubes (experimantally demonstrated) <br>{{wikitodo|add reference}}
 
* [[diamondoid]] molecular bearings and other [[diamondoid molecular elements|DMEs]] with sliding interfaces.
 
* [[diamondoid]] molecular bearings and other [[diamondoid molecular elements|DMEs]] with sliding interfaces.
−
* an advanced [[metamaterial]] forming an [[infinitesimal bearing]] structure.  
+
* an advanced [[metamaterial]] forming an [[infinitesimal bearing]] structure.
  
−
If [[atomic precision|AP]] surfaces are designed or aligned to not mesh then the "perceived bumps" (the bumps that the surfaces perceive as a whole) become lower and their spacial frequency becomes higher (more bumps per length).
+
== Low friction without superlubricity ==
−
If the surface pressure isn't extremely high the characteristic thermal energy k<sub>B</sub>T can become a lot higher than the bumps energy barriers.
+
−
Thus the friction becomes so low that e.g. an unconstrained [[diamondoid molecular elements|DMME]] bearing can be activated thermally and may starts turning randomly in a [//en.wikipedia.org/wiki/Brownian_motion Brownian] fashion '''[to verify]'''.
+
  
−
Oxygen or sulfur with their two bonds in a plane parallel to the relative sliding direction are a good choice for [[surface termination]] of bearing interfaces since this configuration gives maximal stiffness in sliding direction.
+
There are a few notes about that on the page: "[[How friction diminishes at the nanoscale]]"
  
−
If the two bonds of the atoms are instead in a plane normal to the sliding direction the lower stiffness may lead to higher energy dissipation (friction). Singly bonded hydrogen fluorine or chlorine passivations have even lower stiffness, see: [http://e-drexler.com/p/04/02/0315pairSnap.html E. Drexlers's blog: snap back dissipation]. This can be deliberately used in [[dissipative elements]] (friction brakes).
+
As long as the energy is efficiently recuperated when crossing repulsive angular locations <br>
 +
Even bearings with large waviness of potential can have low friction. <br>
 +
What absolutely must not happen is interfaces having such low stiffness that [[snapback]] is starting to occur.  
  
−
Note that superlubrication is akin to superconuctivity only in name:
+
== What kind of friction are we even talking about here? ==
 +
 
 +
A very good question. <br>
 +
 
 +
=== Classical static Friction? ===
 +
 
 +
Well as soon as the waviness of the potential gets close and falls below
 +
to the thermal energy (equipartitioning theorem)
 +
there should be literally zero static friction.
 +
There must be a point where a constant torque does not lead to a boundless acceleration. Hmm ...
 +
 
 +
But superlubricity is supposed to not have a point where it (more or less suddenly) falls to unmeasurably small levels like superconductivity. Hmm ...
 +
 
 +
=== Friction from dynamic drag? ===
 +
 
 +
Friction losses from dynamic (speed dependent) drag can get quite high. <br>
 +
So drawing an analogy to superconduction here is far fetched. <br>
 +
See numbers on the page: [[Friction in gem-gum technology]]
 +
 
 +
'''Band-stiffness scattering drag''' (BSSD) can be reduced by tuning for superlubrication: <br>
 +
Interestingly there are two parameters. Not just the incommensurability.
 +
 
 +
* The '''velocity ratio of the alignment bands''' goes in '''quadratically''' <br><math> R = v_{bands} / v = |k_1| / |k_2 - k_1|</math> – [[Nanosystems]] (7.22)
 +
* The '''relative amplitude of variations in stiffness''' of the interface at different angles goes in '''linearly''' <br><math> \Delta k_a / k_a</math> {{wikitodo|add a sketch}}
 +
 
 +
<math>P_{BSSdrag} \propto (\Delta k_a / k_a) R^2</math> – [[Nanosystems]] (10.23, 10.24)
 +
 
 +
'''Shear-reflection drag''' (SRD) is not influenced by these parameters. <br>
 +
It is the remnant friction that remains in a well designed bearing.
 +
 
 +
Oddly simulations of nanotube bearings (see math on page [[Friction in gem-gum technology]]) are quite a bit above the point of dominance of shear-reflection drag. And that despite this being a quite conservative (pessimistic) estimation for levels of drag.
 +
 
 +
{{todo|Resolve the many not unrelevant mysteries here. More reading and thinking needed.}}
 +
 
 +
== Superlubricity - vs - Superconductivity ==
 +
 
 +
The name "superlubricity" points to some weak analogies to [[superconductivity]]:
 +
* similar: It is also a state of low energy dissipation during the motion of elemental particles
 +
* dissimilar: It has no sharp onset/cutoff point and friction does not fall to unmeasurably low levels
 +
* dissimilar: It is present at all (non destructive) temperatures including ~300K room temperature
 
* Superlubrication is reached by decrease of degree of intermeshment while superconductivity is reached by decrease of temperature.
 
* Superlubrication is reached by decrease of degree of intermeshment while superconductivity is reached by decrease of temperature.
−
* There is not a sharp cutoff in friction when decreasing the dergree of intermeshment like the cutoff in superconductivity when decreasing temperature.
+
* There is not a sharp cutoff in friction when decreasing the degree of intermeshment like the cutoff in superconductivity when decreasing temperature.
  
−
== DM bearings ==
+
= Thresholds? =
  
−
Interestingly Van der Waals forces allow for stable designs in which the axle in [[diamondoid molecular elements|DM]] bearings is pulled outward in all directions instead of compressed inward allowing even lower friction. At high operation speeds resonant vibrations might occur though.
+
<center>
 +
{|
 +
|[[File:0315pairPot.gif|200px|right|thumb|smoothly sliding atoms <br>– graphic by Erik K. Drexler]]
 +
|[[File:0322pairSnap.gif|200px|right|thumb|unsmoothly sliding atoms <br>– graphic by Erik K. Drexler]]
 +
|}</center>
  
−
== Main power dissipation mechanisms ==
+
When it comes to dynamic speed dependent friction the waviness of the energy potential is actually not that important. <br>
 +
As long as there is no [[snapback]] the energy needed to overcome the next angle of maximum energy can be recuperated.
  
−
[Todo...]
+
Thee is no special threshold for superlubricity, but there are other special thresholds:
 +
* The waviness of the energy over the turning angle is exactly equal to the thermal energy per degree of freedom <br>(this is temperature dependent, but a constant for 300K room temperature)
 +
* The interface is at the threshold to [[snapback]]
  
−
== External links ==
+
== Thermal activation energy - vs - Angular energy waviness ==
  
−
* from E. Drexlers metamodern blog: [http://e-drexler.com/p/04/03/0322drags.html Phonon drag in sleeve bearings can be orders of magnitude smaller than viscous drag in liquids]
+
If [[positional atomic precision|AP]] surfaces are designed or aligned to not mesh then the "perceived bumps" (the bumps that the surfaces perceive as a whole) become lower and their spacial frequency becomes higher (more bumps per length).
 +
If the surface pressure isn't extremely high '''the characteristic thermal energy k<sub>B</sub>T can become a lot higher than the bumps energy barriers'''.
 +
Thus the (static) friction becomes so low that e.g. an unconstrained [[diamondoid molecular elements|DMME]] bearing can be activated thermally and may starts turning randomly in a [//en.wikipedia.org/wiki/Brownian_motion Brownian] fashion '''[to verify]'''.
 +
 
 +
== Choice of [[nanoscale passivation]] and [[snapback]] dissipation ==
 +
 
 +
Oxygen or sulfur with their two bonds in a plane parallel to the relative sliding direction are a good choice for [[surface termination]] of bearing interfaces since this configuration gives maximal stiffness in sliding direction.
 +
 
 +
If the two bonds of the atoms are instead in a plane normal to the sliding direction the lower stiffness may lead to higher energy dissipation (friction). Singly bonded hydrogen fluorine or chlorine passivations have even lower stiffness, see: [http://e-drexler.com/p/04/02/0315pairSnap.html E. Drexlers's blog: snap back dissipation]. This can be deliberately used in [[dissipative elements]] (friction brakes). There's a critical point at which snapping back starts to occur ['''todo:''' simulation results needed].
 +
 
 +
= Main power dissipation mechanisms =
 +
 
 +
{{todo|Integrate infos from [[Nanosystems]] and the "evaluating friction ..." paper.}}
 +
 
 +
Main article: [[Friction mechanisms]]
 +
 
 +
= Superlubricating crystolecule machine elements =
 +
 
 +
== Atomically precise gemstone bearings ==
 +
 
 +
Interestingly [[Van der Waals force]]s allow for stable designs in which the axle in [[diamondoid molecular elements|gemstome bearings]] is pulled outward in all directions instead of compressed inward. <br>
 +
This allows for lower friction at the cost of less load bearing capacity.
 +
 
 +
Stretching terminology a bit this could be counted as one form of [[Levitation]].
 +
 
 +
* Q: How much can friction be lowered by this strategy?
 +
* Q: Might resonant vibrations start to occur at high operation speeds?
 +
 
 +
== Atomically precise gemstone gears ==
 +
 
 +
Gears with straight rows of teeth, while reducing atomic bumps due to being roughly shape complementary, do not smooth out atomic bumps beyond that. <br>
 +
Helical gears in contrast can smooth out and do smooth out atomic bumps. <br>
 +
Up to some point the longer the contact between gear teeth the better the smoothing. <br>
 +
This is a motivation to not make gears at the absolute minimal size possible but a bit above that.
 +
 
 +
<small>As a side-note: Another reason for making gears a bit above the absolute minimal size is that stiffness of the intermeshing gear teeth interface can be matched to the stiffness of the axles (preventing flex wave reflections in higher frequency operations).</small>
 +
 
 +
== Rods in sleeves ==
 +
 
 +
Challenges:
 +
* Using the same material for rod and sleeve can lead to pretty much the same spacing and no good superlubrication.
 +
* Getting a fit of just the right tightness with a compact sleeve around a thin reciprocative rod may be more difficult than getting just the right fit with a big stator sleeve around a big diameter rotor. Bigger loops can be finer adjusted in a relative sense.
 +
 
 +
= Snapping into place =
 +
 
 +
As mentioned before there is always a slight remaining ripple in the position dependant potential energy of the bearing (in its potential energy surface - PES).
 +
This energy corresponds to the (very low) temperature under which the bearing starts to snap into place.
 +
(If quantum zero point energy isn't too high?)
 +
 
 +
= Quantum effects in (rotative) gemstone nanomachinery =
 +
 
 +
Quantisation of angular momentum is usually not present except for very small free rotating elements at very low temperatures.
 +
Axels in nanomechanical systems are usually coupled to a bigger system making their moment of inertia rather big.
 +
Free rotations will often be suppressed which leaves only torsional vibrations as possible degree of freedom.
 +
 
 +
See:
 +
* [[Estimation of nanomechanical quantisation]].
 +
* [[Nanomechanics is barely mechanical quantummechanics]]
 +
 
 +
= Related =
 +
 
 +
* More [[friction]] due to [[rising surface area]].
 +
* Less friction: [[How friction diminishes at the nanoscale]].
 +
* ''Gem-like molecular elements'' or for short on this wiki here: ''[[crystolecule]]s''
 +
* Superlubrication goes perfectly together with [[infinitesimal bearing]]s, reducing friction even further.
 +
* [[Negative pressure bearings]]
 +
* [[Levitation]]
 +
-----
 +
* '''[[Superelasticity]]''' ... another performance parameter that can be unusually elevated at the nanoscale
 +
 
 +
== Concrete examples ==
 +
 
 +
In [[atomically precise bearings]] like:
 +
* The whole raceway of [[atomically precise slide bearing]]s
 +
* The flanks of bigger [[atomically precise roller gearbearing]]s
 +
 
 +
Some of the the moving [[examples of diamondoid molecular machine elements]] <br>
 +
feature tuned incommensurability and thus superlubricity.
 +
 
 +
= External links =
 +
 
 +
'''Related pages on E. Drexlers homepage (internet archive):'''
 +
* [https://web.archive.org/web/20160305212101/http://e-drexler.com/p/04/03/0322drags.html Phonon drag in sleeve bearings can be orders of magnitude smaller than viscous drag in liquids]
 +
* [https://web.archive.org/web/20160314084528/http://e-drexler.com/p/04/02/0315bearingSums.html Symmetric molecular bearings can exhibit low energy barriers that are insensitive to details of the potential energy function]
 +
* [https://web.archive.org/web/20160314060004/http://e-drexler.com/p/04/02/0315pairPot.html Stiffly supported sliding atoms have a smooth interaction potential]
 +
* [https://web.archive.org/web/20160314100841/http://e-drexler.com/p/04/02/0315pairSnap.html Softly supported sliding atoms can undergo abrupt transitions in energy] -- Related page: [[Snapback]]
 +
 
 +
----
 +
* Paper: "Evaluating the Friction of Rotary Joints in Molecular Machines" (2017-01-27) <br>[https://arxiv.org/abs/1701.08202 arXiv:1701.08202] [cond-mat.soft]; [https://www.researchgate.net/publication/313096623_Evaluating_the_Friction_of_Rotary_Joints_in_Molecular_Machines ResearchGate]; [http://pubs.rsc.org/en/content/articlelanding/2017/me/c7me00021a#!divAbstract pubs.rsc.org]; [https://scholar.google.com/citations?view_op=view_citation&hl=en&user=wXyRCbEAAAAJ&citation_for_view=wXyRCbEAAAAJ:kNdYIx-mwKoC Google Scholar]<br> This uses simpified results from the [https://en.wikipedia.org/wiki/Fluctuation-dissipation_theorem Fluctuation-dissipation_theorem (Wikipedia-link)]
 +
----
 +
* Zyvex: [http://www.zyvex.com/nanotech/bearingProof.html A Proof About Molecular Bearings] by Ralph C. Merkle -- 1993
 +
----
 
* Wikipedia: [http://en.wikipedia.org/wiki/Superlubricity Superlubricity]
 
* Wikipedia: [http://en.wikipedia.org/wiki/Superlubricity Superlubricity]
 +
* Wikipedia: [https://en.wikipedia.org/wiki/Carbon_nanotube_nanomotor Carbon nanotube nanomotor]
 
* Experiments with nanotubes: [http://www.nanowerk.com/spotlight/spotid=33115.php Superlubricity on the macroscale]
 
* Experiments with nanotubes: [http://www.nanowerk.com/spotlight/spotid=33115.php Superlubricity on the macroscale]
 +
 +
= References =
 +
 +
<references/>
  
 
[[Category: Technology level III]]
 
[[Category: Technology level III]]
 
[[Category: Technology level III]]
 
[[Category: Technology level III]]

Latest revision as of 09:07, 29 August 2022

Graphic by Eric K. Drexler -- Citation: "Symmetric molecular bearings can exhibit low energy barriers that are insensitive to details of the potential energy function" [1]
A simulation made with the software "Nanoengineer-1"
Author Eric K. Drexler – An atomically precise slide bearing.
Coaxial nanotube bearing based nano-motors have been experimentally built and tested. While still very crude they already show very little friction. Much unlike the problems with stiction and wear in photolithographically produced MEMS systems. – Coaxial nanotubes are quite similar in characteristics to crystolecule bearing so the working nanotube bearings give experimental evidence for crystolecular elements working with low friction an wear free.

Up: Friction in gem-gum technology

Superlubricity (or superlubrication) is a state of extremely low friction that occurs when two atomically precise surfaces slide along each other in such a way that the "atomic bumps" do not mesh.
More precisely: When the lattices distances projected in the direction of movement are maximally incommensurate.

Key aspects of superlubricity

  • Present in gem-gum-tec: Superlubricity is present in crystolecule bearings which are essential molecular machine elements in gemstone metamaterial technology.
  • Eternally wear fee: Superlubricity features no "collinding mountainranges" at the nanoscale that can mutually shear off their tips. Thus superlubricating bearings are fully wear free. The dominating damage mechanism of superlubricating bearings is ionizing radiation or thermal destruction in extreme conditions (melting, evaporationg, hot chemical dissolution, ..). There is damage over time but there is no wear from mechanical friction (and load) over time.

Examples exhibiting superlubricity

  • two coplanar sheets of graphene rotated to one another to minimally mesh
  • two appropriately chosen tightly fitting coaxial nanotubes (experimantally demonstrated)
    (wiki-TODO: add reference)
  • diamondoid molecular bearings and other DMEs with sliding interfaces.
  • an advanced metamaterial forming an infinitesimal bearing structure.

Low friction without superlubricity

There are a few notes about that on the page: "How friction diminishes at the nanoscale"

As long as the energy is efficiently recuperated when crossing repulsive angular locations
Even bearings with large waviness of potential can have low friction.
What absolutely must not happen is interfaces having such low stiffness that snapback is starting to occur.

What kind of friction are we even talking about here?

A very good question.

Classical static Friction?

Well as soon as the waviness of the potential gets close and falls below to the thermal energy (equipartitioning theorem) there should be literally zero static friction. There must be a point where a constant torque does not lead to a boundless acceleration. Hmm ...

But superlubricity is supposed to not have a point where it (more or less suddenly) falls to unmeasurably small levels like superconductivity. Hmm ...

Friction from dynamic drag?

Friction losses from dynamic (speed dependent) drag can get quite high.
So drawing an analogy to superconduction here is far fetched.
See numbers on the page: Friction in gem-gum technology

Band-stiffness scattering drag (BSSD) can be reduced by tuning for superlubrication:
Interestingly there are two parameters. Not just the incommensurability.

  • The velocity ratio of the alignment bands goes in quadratically
    [math] R = v_{bands} / v = |k_1| / |k_2 - k_1|[/math] – Nanosystems (7.22)
  • The relative amplitude of variations in stiffness of the interface at different angles goes in linearly
    [math] \Delta k_a / k_a[/math] (wiki-TODO: add a sketch)

[math]P_{BSSdrag} \propto (\Delta k_a / k_a) R^2[/math] – Nanosystems (10.23, 10.24)

Shear-reflection drag (SRD) is not influenced by these parameters.
It is the remnant friction that remains in a well designed bearing.

Oddly simulations of nanotube bearings (see math on page Friction in gem-gum technology) are quite a bit above the point of dominance of shear-reflection drag. And that despite this being a quite conservative (pessimistic) estimation for levels of drag.

(TODO: Resolve the many not unrelevant mysteries here. More reading and thinking needed.)

Superlubricity - vs - Superconductivity

The name "superlubricity" points to some weak analogies to superconductivity:

  • similar: It is also a state of low energy dissipation during the motion of elemental particles
  • dissimilar: It has no sharp onset/cutoff point and friction does not fall to unmeasurably low levels
  • dissimilar: It is present at all (non destructive) temperatures including ~300K room temperature
  • Superlubrication is reached by decrease of degree of intermeshment while superconductivity is reached by decrease of temperature.
  • There is not a sharp cutoff in friction when decreasing the degree of intermeshment like the cutoff in superconductivity when decreasing temperature.

Thresholds?

smoothly sliding atoms
– graphic by Erik K. Drexler
unsmoothly sliding atoms
– graphic by Erik K. Drexler

When it comes to dynamic speed dependent friction the waviness of the energy potential is actually not that important.
As long as there is no snapback the energy needed to overcome the next angle of maximum energy can be recuperated.

Thee is no special threshold for superlubricity, but there are other special thresholds:

  • The waviness of the energy over the turning angle is exactly equal to the thermal energy per degree of freedom
    (this is temperature dependent, but a constant for 300K room temperature)
  • The interface is at the threshold to snapback

Thermal activation energy - vs - Angular energy waviness

If AP surfaces are designed or aligned to not mesh then the "perceived bumps" (the bumps that the surfaces perceive as a whole) become lower and their spacial frequency becomes higher (more bumps per length). If the surface pressure isn't extremely high the characteristic thermal energy kBT can become a lot higher than the bumps energy barriers. Thus the (static) friction becomes so low that e.g. an unconstrained DMME bearing can be activated thermally and may starts turning randomly in a Brownian fashion [to verify].

Choice of nanoscale passivation and snapback dissipation

Oxygen or sulfur with their two bonds in a plane parallel to the relative sliding direction are a good choice for surface termination of bearing interfaces since this configuration gives maximal stiffness in sliding direction.

If the two bonds of the atoms are instead in a plane normal to the sliding direction the lower stiffness may lead to higher energy dissipation (friction). Singly bonded hydrogen fluorine or chlorine passivations have even lower stiffness, see: E. Drexlers's blog: snap back dissipation. This can be deliberately used in dissipative elements (friction brakes). There's a critical point at which snapping back starts to occur [todo: simulation results needed].

Main power dissipation mechanisms

(TODO: Integrate infos from Nanosystems and the "evaluating friction ..." paper.)

Main article: Friction mechanisms

Superlubricating crystolecule machine elements

Atomically precise gemstone bearings

Interestingly Van der Waals forces allow for stable designs in which the axle in gemstome bearings is pulled outward in all directions instead of compressed inward.
This allows for lower friction at the cost of less load bearing capacity.

Stretching terminology a bit this could be counted as one form of Levitation.

  • Q: How much can friction be lowered by this strategy?
  • Q: Might resonant vibrations start to occur at high operation speeds?

Atomically precise gemstone gears

Gears with straight rows of teeth, while reducing atomic bumps due to being roughly shape complementary, do not smooth out atomic bumps beyond that.
Helical gears in contrast can smooth out and do smooth out atomic bumps.
Up to some point the longer the contact between gear teeth the better the smoothing.
This is a motivation to not make gears at the absolute minimal size possible but a bit above that.

As a side-note: Another reason for making gears a bit above the absolute minimal size is that stiffness of the intermeshing gear teeth interface can be matched to the stiffness of the axles (preventing flex wave reflections in higher frequency operations).

Rods in sleeves

Challenges:

  • Using the same material for rod and sleeve can lead to pretty much the same spacing and no good superlubrication.
  • Getting a fit of just the right tightness with a compact sleeve around a thin reciprocative rod may be more difficult than getting just the right fit with a big stator sleeve around a big diameter rotor. Bigger loops can be finer adjusted in a relative sense.

Snapping into place

As mentioned before there is always a slight remaining ripple in the position dependant potential energy of the bearing (in its potential energy surface - PES). This energy corresponds to the (very low) temperature under which the bearing starts to snap into place. (If quantum zero point energy isn't too high?)

Quantum effects in (rotative) gemstone nanomachinery

Quantisation of angular momentum is usually not present except for very small free rotating elements at very low temperatures. Axels in nanomechanical systems are usually coupled to a bigger system making their moment of inertia rather big. Free rotations will often be suppressed which leaves only torsional vibrations as possible degree of freedom.

See:

Related

  • Superelasticity ... another performance parameter that can be unusually elevated at the nanoscale

Concrete examples

In atomically precise bearings like:

Some of the the moving examples of diamondoid molecular machine elements
feature tuned incommensurability and thus superlubricity.

External links

Related pages on E. Drexlers homepage (internet archive):

References

  1. ↑ Drag mechanisms in symmetrical sleeve bearings: Drexler, K. E. (1992) Nanosystems: Molecular Machinery, Manufacturing, and Computation. Wiley/Interscience, pp.290–293.
Retrieved from "http://apm.bplaced.net/w/index.php?title=Superlubricity&oldid=13327"