Difference between revisions of "Passivation layer mineral"

From apm
Jump to: navigation, search
m (External links: added link to wikipedia page: "Passivation_(chemistry)")
m (Passivation layer minerals of today's industrial metals)
 
(3 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
* Zn zinc - ... - ZnO - wikipedia: [http://en.wikipedia.org/wiki/Zinc_oxide zinc oxide] - '''[http://en.wikipedia.org/wiki/Zincite zincite]'''
 
* Zn zinc - ... - ZnO - wikipedia: [http://en.wikipedia.org/wiki/Zinc_oxide zinc oxide] - '''[http://en.wikipedia.org/wiki/Zincite zincite]'''
 
* Sn tin - SnO2 - wikipedia: [http://en.wikipedia.org/wiki/Tin_dioxide tin dioxide] - '''[http://en.wikipedia.org/wiki/Cassiterite cassiterite]'''
 
* Sn tin - SnO2 - wikipedia: [http://en.wikipedia.org/wiki/Tin_dioxide tin dioxide] - '''[http://en.wikipedia.org/wiki/Cassiterite cassiterite]'''
* Cu copper - wikipedia: [http://en.wikipedia.org/wiki/Patina patina] ...
+
* Cu copper - wikipedia: [http://en.wikipedia.org/wiki/Patina patina] ... See: [[Salts of oxoacids#Carbonate minerals]] – Malachite & Aurite – also copper sulfate CuSO<sub>4</sub>(H<sub>2</sub>O)<sub>x</sub>
 
* Ni nickel - wikipedia: [http://en.wikipedia.org/wiki/Nickel(II)_fluoride nickel fluoride] - [http://en.wikipedia.org/wiki/Nickel_oxide nickel oxides] - '''[http://en.wikipedia.org/wiki/Bunsenite busenite]''' Nickel minerals can cause allergies through prolonged skin contact.
 
* Ni nickel - wikipedia: [http://en.wikipedia.org/wiki/Nickel(II)_fluoride nickel fluoride] - [http://en.wikipedia.org/wiki/Nickel_oxide nickel oxides] - '''[http://en.wikipedia.org/wiki/Bunsenite busenite]''' Nickel minerals can cause allergies through prolonged skin contact.
 
* Cr chromium ...
 
* Cr chromium ...
Line 26: Line 26:
 
What should be doable almost always is hydrogen passivation. (Such passivation may cause higher friction due to high lateral spacing between the small hydrogen atoms sitting atop larger atoms and the low lateral stiffness of the single bonded hydrogen atoms)
 
What should be doable almost always is hydrogen passivation. (Such passivation may cause higher friction due to high lateral spacing between the small hydrogen atoms sitting atop larger atoms and the low lateral stiffness of the single bonded hydrogen atoms)
 
It may be necessary to find a special solution for each indivitual material - nitrogen phosphorus and sulfur may often be useful for plugging surfaces closed. (See: [[Surface passivation]])
 
It may be necessary to find a special solution for each indivitual material - nitrogen phosphorus and sulfur may often be useful for plugging surfaces closed. (See: [[Surface passivation]])
 +
 +
== Notes ==
 +
 +
* {{wikitodo|Add everyday metal and corresponding gemstone pic-pairs -- for optically pleasing illustration}}
  
 
== Related ==
 
== Related ==
  
 
* [[Surface passivation]]
 
* [[Surface passivation]]
 +
* [[Common stones]]
  
 
== External links ==
 
== External links ==
  
* Wikipedia: [https://en.wikipedia.org/wiki/Passivation_(chemistry) Passivation_(chemistry)]
+
Wikipedia:  
 +
* [https://en.wikipedia.org/wiki/Passivation_(chemistry) Passivation_(chemistry)]
 +
* [https://en.wikipedia.org/wiki/Corrosion Corrosion]
  
 
Passivation layer minerals can be found in ...
 
Passivation layer minerals can be found in ...

Latest revision as of 15:07, 1 July 2021

Passivation layer minerals of today's industrial metals

We do have daily skin contact with these minerals without even realizing it.
Often these minerals are naturally present as ores from which the metals are extracted.

wikipedia: passivation in general


  • PbS Galena [1] Mohs 2.5-3 (soft)

Passivation of passivation layer minerals

Here an interesting problem occurs. To prevent two atomically precisely flat blocks from fusing seamlessly together on contact their surfaces must look differently than their insides. Specifically it is often a good idea to cover the whole surface with lone pairs of electrons. But further oxidation of an already oxidized material will probably not work or be rather unstable [to investigate for every specific situation]. What should be doable almost always is hydrogen passivation. (Such passivation may cause higher friction due to high lateral spacing between the small hydrogen atoms sitting atop larger atoms and the low lateral stiffness of the single bonded hydrogen atoms) It may be necessary to find a special solution for each indivitual material - nitrogen phosphorus and sulfur may often be useful for plugging surfaces closed. (See: Surface passivation)

Notes

  • (wiki-TODO: Add everyday metal and corresponding gemstone pic-pairs -- for optically pleasing illustration)

Related

External links

Wikipedia:

Passivation layer minerals can be found in ...