Difference between revisions of "Convergent mechanical actuation"
m (Apm moved page Macroscopification to Mechanical macroscopification) |
(added longitudinal transversal distinction) |
||
| Line 3: | Line 3: | ||
* [[interfacial drives]] ''(invented name)'' | * [[interfacial drives]] ''(invented name)'' | ||
| + | * [[artificial motor-muscles]] | ||
* hierachical axles ''(invented name)'' | * hierachical axles ''(invented name)'' | ||
* ... | * ... | ||
| Line 10: | Line 11: | ||
An [[interfacial drive]] has the same basic structure as an [[infinitesimal bearings|infinitesimal bearing]] | An [[interfacial drive]] has the same basic structure as an [[infinitesimal bearings|infinitesimal bearing]] | ||
with the layer structure made so much bigger that enegry generation and possibly [[energy storage cells|storage]] can be incorporated. | with the layer structure made so much bigger that enegry generation and possibly [[energy storage cells|storage]] can be incorporated. | ||
| + | They create shear movement (transversal). The volume of the material stays constant. | ||
| + | |||
| + | == Artificial motor-muscles == | ||
| + | |||
| + | Details about them can be found on the "[[artificial motor-muscles]]" page. | ||
| + | They can be used to create axial (longitudinal) shape changes. In operation the materials volume changes. | ||
== Hierarchical axles == | == Hierarchical axles == | ||
| Line 15: | Line 22: | ||
A system of hirachical axles would be a macroscopic axle by driven by '''n<sub>1</sub>''' sub axles each of which is driven by '''n<sub>2</sub>''' sub sub axles and so forth down to the lower physical size limit meaning axles built out of single [[diamondoid molecular element|DMMEs]]. | A system of hirachical axles would be a macroscopic axle by driven by '''n<sub>1</sub>''' sub axles each of which is driven by '''n<sub>2</sub>''' sub sub axles and so forth down to the lower physical size limit meaning axles built out of single [[diamondoid molecular element|DMMEs]]. | ||
| − | This design is more complicated than an [[interfacial drive]] since it has a much more | + | This design is more complicated than an [[interfacial drive]] since it has a much more complex fractal geometry and many layers at different size scales calling for different designs. All the axles from the third or fourth hirachical layer from the bottom upwards will need to be supported by [[infinitesimal bearings]]. |
Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion ''(drive contact)'' is another difficult problem. | Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion ''(drive contact)'' is another difficult problem. | ||
Revision as of 15:00, 27 December 2013
For adding up nanoscopic movement (speed / angular speed and force / torque) generated by chemical electrical or an other energy source to macroscopic movement there are multiple methods conceivable:
- interfacial drives (invented name)
- artificial motor-muscles
- hierachical axles (invented name)
- ...
Interfacial drive
An interfacial drive has the same basic structure as an infinitesimal bearing with the layer structure made so much bigger that enegry generation and possibly storage can be incorporated. They create shear movement (transversal). The volume of the material stays constant.
Artificial motor-muscles
Details about them can be found on the "artificial motor-muscles" page. They can be used to create axial (longitudinal) shape changes. In operation the materials volume changes.
Hierarchical axles
A system of hirachical axles would be a macroscopic axle by driven by n1 sub axles each of which is driven by n2 sub sub axles and so forth down to the lower physical size limit meaning axles built out of single DMMEs.
This design is more complicated than an interfacial drive since it has a much more complex fractal geometry and many layers at different size scales calling for different designs. All the axles from the third or fourth hirachical layer from the bottom upwards will need to be supported by infinitesimal bearings. Evening out the speed difference on the contact points of intermeshing meso- to macroscopic gears in a similar fashion (drive contact) is another difficult problem.
To avoid gearing down to too low speeds some stages need to gear up as a countermeasure. There are more than eight inter-meshing gear contacts in series from the generators to the macroscopic load (or vice versa) thus this design only makes sense with the exceptionally high efficiency of nanomechanical gears compared to macroscopic gears.
