Difference between revisions of "Robust vacuum balloon metamaterial"
(→Price: no self accelerating growth of airmeshes) |
(this is not about diamondoid balloon products) |
||
| Line 2: | Line 2: | ||
Advanced atomically precise manufacturing allows to build a new class of aeronautic balloons that use '''vacuum instead of lifting gas'''. | Advanced atomically precise manufacturing allows to build a new class of aeronautic balloons that use '''vacuum instead of lifting gas'''. | ||
The necessary support structures that counter the external pressure can be made fine and filigree enough such that the whole structure is still lighter than air. | The necessary support structures that counter the external pressure can be made fine and filigree enough such that the whole structure is still lighter than air. | ||
| + | |||
| + | '''Note:''' Aeronautic balloons out of robust metamaterials are not to confuse with: [[Diamondoid balloon products]] | ||
== Proof of principle == | == Proof of principle == | ||
| Line 22: | Line 24: | ||
== Applications == | == Applications == | ||
| − | * Various forms of "[[airmesh]]es" e.g. for transportation wind power and weather control | + | * Various forms of "[[airmesh]]es" e.g. for transportation wind power and weather control (speculative) |
* massive redirection of sunlight | * massive redirection of sunlight | ||
| − | * low mass air transport | + | * low mass air transport (speculative) |
== Price == | == Price == | ||
Revision as of 13:20, 15 June 2016
Advanced atomically precise manufacturing allows to build a new class of aeronautic balloons that use vacuum instead of lifting gas. The necessary support structures that counter the external pressure can be made fine and filigree enough such that the whole structure is still lighter than air.
Note: Aeronautic balloons out of robust metamaterials are not to confuse with: Diamondoid balloon products
Contents
Proof of principle
This capability is already demonstrated by a few special aerogels today but unlike todays aerogels balloon metamaterial is an advanced atomically precise metamaterial and shows much more resilience against physical attack (crunching/ripping).
Mechanical stability
Chrunching: When it is crunched it reversible folds down to a state with almost no void gaps rasing its compressive strength to almost to the level of solid matterial. Obviously it will stop floating for the time it stays crunched. The material can (and probably should) get designed in such a way that when it gets crunched it stores at least enough energy such that the subsequent (undamaged) unfolding - which has to work against atmospheric pressure - can be easily performed.
Ripping: When a force acts on the balloon-metamaterial that pulls it apart the internal structure can reversibly align into the axis of the polling force again like in the compressive case to the point where it becomes almost as dense as solid material and reaches almost the tensile strength of solid material. In practice one probably wants to put in a safety limit way below the strength of carbon nanotubes (See:"[Self limitation for safety]" and "[Sharp edges and splinters]"). Pulling in all directions simultaneously (which natural occurring forces can't do) should rip the metamaterial apart easily. A malicious attack with utility fog may be possible (further analysis needed).
Base material quartz
Since earth's atmosphere contains oxygen any material that burns easily is problematic. While diamond does not burn in its bulk form the a highly filigree metamaterial structure would burn very vigorously. The solution is to use a material that is already in its oxidized state. Best options are Silicon dioxide (quartz) aluminum dioxide (sapphire) or titanium dioxide (Rutile/Anatas/Brookite). Biominerals like calcite and hydroxylapatite also do not burn since they are based on oxides of carbon and phosphorus respectively. necessary internal nanomachine bearings may be made out of silicon carbide (moissanite) it burns but builds up a glass layer that prevents further burning.
Applications
- Various forms of "airmeshes" e.g. for transportation wind power and weather control (speculative)
- massive redirection of sunlight
- low mass air transport (speculative)
Price
Since the density is lower than 1kg/m^3 (three orders of magnitude lower than dense material - factor 1000) huge volumes can be filled cheaply. Since for fire safety reasons atmospheric carbon dioxide can only be used in small quantities lithospheric mining is required making it a bit more expensive than dense carbon rich diamondoid products. There is no possibility for self accelerating growth through growing surface area like in the case of malicious air using replicators. But advanced mining can scale up self acceleratingly. It just needs energy in lithophilic elements out.
It seems possible that it'll become cheaper than todays cheapest building materials concrete and asphalt. Allowing to build airmeshes on a larger scale than todays ground-bound street network - a network of skyroads so to say.
Relation to the conventional lifting gas method
Avoiding the use of the very scarce element helium may lower price from todays perspective albeit we may import that element from space in the future if we figure out how to get it out of the potential well of Uranus and Neptune. Its unclear how safe hydrogen microcompartmentalized in glass metamaterial could be - maybe comparable to methane hydride - (TODO: closer investigatin required).
External links
- (TODO: add link to video showing aerogel flake floating and rising in air)
