Free floating crystolecule

From apm
Revision as of 13:19, 22 September 2025 by Apm (talk | contribs) (High energy ejection out of machine phase into dystactic phase: fixed some typos and added note on this being more a cannon/gun than a gentle push-out)
Jump to navigation Jump to search
This article is a stub. It needs to be expanded.

Getting crystolecules into huge scale free space should afford some easily manageable conscious effort.
If charged they than can be manipulated with conventional techniques, electric fields, magnetic fields, and optical traps.
Cooling them down aka slowing then down is possible so far that gravity acting on them can be observed.
But these crystolecules are far outside machine phase deep inside gas phase (or dystactic phase).

Instead getting crystolecules down to low speed and
keeping them close to the emitting source in a small volume and
having them without a charge is likely very difficult.

Due to intercrystolecular forces being many orders of magnitude bigger than gravity
either they stick like very strongly or they fly off like very fast with a lot of kinetic energy.
There is no pushing them out and they fall off by gravity locally at small scale.

Crossing the heat-overpowers-gravity size-scale they fall in a large parabolic arc in a good vacuum.
Or are diffused away to who knows where in a gas.

High energy ejection out of machine phase into dystactic phase

Simulation by Philip Turner. Beware of misleading aspects in animations of diamondoid molecular machine elements. Pauli repulsion pushes the piston out of the slightly too tight cylinder. The effect gets weaker with progressive push-out but still suffices for a final ejection. A bend snap makes for a sudden re-acceleration and for strong excitation of mechanical modes. As a side-note: There is also some significant conversion to kinetic energy. This is around tens to ~100m/s. More like a crystolecule cannon than a gentle push-out.

VdW suck-in and suck-on can accelerate a crystolecule enough
such that it overshoots the end of its unbostructed superlubric rail and it escapes into free space.

High ebergy intercrystolecular snapping modes can cause
high energy mechanical exctiations which in turn can shoot off a crystolecule into free space.

A piston in a slightly too tight cylinder can cause push-out by Pauli-repulsion.
See the simulation clip. The push-out effect gets weaker the further it is pushed out,
Attained speed gets dissipated making it slow down a bit,
but in the case of this specific simulation it still sufficed for an eventual ejection.
There is also a bend-snap happening at the very end making for a sudden re-acceleration.
And for a lot of very strong mechanical mode excitations.

Also related here is the topic of accidental heatpumps.

These are high speed high energy events compared to proposed operation speeds and energies. Usually happening at least at several dozen m/s speeds.

(wiki-TODO: Maybe move to main page: "Overstretch pushout".)

Related