Difference between revisions of "Productive Nanosystems From molecules to superproducts"

From apm
Jump to: navigation, search
(Goals of this discussion page: great overhaul)
(Related: added links to related pages)
(19 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{stub}}
 
{{stub}}
  
[[File:ProductiveNanosystemsMainScreencap.jpg|400px|thumb|right|Screen capture from the video '''showing several processing stages highly compressed into just one image'''. Visible is (1) [[ethyne]] purification stages (2a & 2b) final transfer of ethyne out of liquid or gas phase and into [[machine phase]] (3) loading of ethyne onto tooltips (4) Abstraction of a pair of hydrogen atoms (5) deposition of a pair of carbon atoms onto a cube shaped [[crystolecule]] under construction (6) transport of along the assembly line. A real design: (A) would have these processing stages much more spaced apart (B) would have the tool tips running on chains too (C) would have the [[molecule sorting stages]] and [[final transfer to machine phase]] worked out in much more detail]]
+
[[File:ProductiveNanosystemsMainScreencap.jpg|400px|thumb|right|Screen capture from the concept animation video: "[[Productive Nanosystems From molecules to superproducts]]" – '''Shown are several processing stages highly compressed into just one image'''. Visible is (1) [[ethyne]] purification stages (2a & 2b) final transfer of ethyne out of liquid or gas phase and into [[machine phase]] (3) loading of ethyne onto tooltips (4) Abstraction of a pair of hydrogen atoms (5) deposition of a pair of carbon atoms onto a cube shaped [[crystolecule]] under construction (6) transport of along the assembly line. A real design: (A) would have these processing stages much more spaced apart (B) would have the tool tips running on chains too (C) would have the [[molecule sorting stages]] and [[final transfer to machine phase]] worked out in much more detail]]
  
 
[[File:ProductiveNanosystemsUnusedSceneToolsOnChain.jpeg|400px|thumb|right|Here is an alternate scene that did not make it into the animation video. The tips are on belts for longer tip-tip encounter time. It seem to suffers from being a too compact design though leading to a few issues like: The polygonal wheels may cause Van der Waals force spikes, the hinge flexing graphene sheet connections seems questionable and the axles are cramped. {{wikitodo|figure out what mechanosynthetic reaction is supposed to be demonstrated here}}]]
 
[[File:ProductiveNanosystemsUnusedSceneToolsOnChain.jpeg|400px|thumb|right|Here is an alternate scene that did not make it into the animation video. The tips are on belts for longer tip-tip encounter time. It seem to suffers from being a too compact design though leading to a few issues like: The polygonal wheels may cause Van der Waals force spikes, the hinge flexing graphene sheet connections seems questionable and the axles are cramped. {{wikitodo|figure out what mechanosynthetic reaction is supposed to be demonstrated here}}]]
Line 8: Line 8:
 
'''Watch it here: [https://archive.org/details/NanoFactory Productive nanosystems: From molecules to superproducts (InternetArchive link)]''' <br>
 
'''Watch it here: [https://archive.org/details/NanoFactory Productive nanosystems: From molecules to superproducts (InternetArchive link)]''' <br>
 
To address the common immediate concerns see: [[Macroscale style machinery at the nanoscale]]
 
To address the common immediate concerns see: [[Macroscale style machinery at the nanoscale]]
 +
 +
Other proposals for [[gem-gum factory]] designs that differ from what is
 +
shown in the here discussed video can be found on the page: "[[Discussion of proposed nanofactory designs]]".
 +
 +
{{wikitodo|add screen captures to the detailed discussions}}
  
 
= Goals =
 
= Goals =
Line 28: Line 33:
 
that will discuss these ideas mostly outside the context of this concept animation video.
 
that will discuss these ideas mostly outside the context of this concept animation video.
  
For proposals for [[gem-gum factory]] designs other than what is presented in this
+
= Brief listings =
here discussed concept animation video check out: "[[Discussion of proposed nanofactory designs]]".
+
  
= List of shown things in the first half =
+
== List of shown things in the first half (zoom-in) ==
  
 
Shown wile zooming in continuously:
 
Shown wile zooming in continuously:
Line 39: Line 43:
 
Shown while zooming out is a list of processing stations.
 
Shown while zooming out is a list of processing stations.
  
= List of shown stations (as brief listing) =
+
== List of shown stations (zoom-out) ==
  
Stations dealing with molecules and [[molecule fragments]]:
+
'''Stations dealing with molecules and [[molecule fragments]]:'''
 
* [[Sorting rotors]] – specifically here: [[Acetylene sorting pump]] – [[Nanosystems]] pages 374, 378, 379
 
* [[Sorting rotors]] – specifically here: [[Acetylene sorting pump]] – [[Nanosystems]] pages 374, 378, 379
 
* [[Final transfer into machine phase]] – this may split up into sub processes – Related:[[Machine phase]]
 
* [[Final transfer into machine phase]] – this may split up into sub processes – Related:[[Machine phase]]
Line 47: Line 51:
 
* [[Tooltip preparation]]
 
* [[Tooltip preparation]]
 
* [[Carbon deposition]] – specifically here: di-carbon deposition – [[Tooltip unloading]]
 
* [[Carbon deposition]] – specifically here: di-carbon deposition – [[Tooltip unloading]]
Stations dealing with [[crystolecules]] and bigger structures:
+
'''Stations dealing with [[crystolecules]] and bigger structures:'''
 
* [[Assembly line positioning stage]] – pallets (adapter pallets)
 
* [[Assembly line positioning stage]] – pallets (adapter pallets)
 
* '''NOT SHOWN IN PUBLISHED VERSION''' – attachment chains for the tool-tips and back-pressure rails
 
* '''NOT SHOWN IN PUBLISHED VERSION''' – attachment chains for the tool-tips and back-pressure rails
* '''NOT SHOWN''' – tooltip positioning stage
+
* '''NOT SHOWN''' – [[Tooltip positioning stage]]
* '''NOT SHOWN''' – switch of belt type and speed transition
+
* '''NOT SHOWN''' – switch of attachment chain type
 +
* '''NOT SHOWN''' – chain speed transition
 
* '''NOT SHOWN''' – early stage [[vacuum lockout]]
 
* '''NOT SHOWN''' – early stage [[vacuum lockout]]
 
* [[Routing station]] (Distribution junction and merging junction)
 
* [[Routing station]] (Distribution junction and merging junction)
Line 57: Line 62:
 
* Stream pickup mechanism
 
* Stream pickup mechanism
 
* First programmable assembly robot – details largely omitted
 
* First programmable assembly robot – details largely omitted
 +
* '''NOT SHOWN''' – second vacuum lockout – eventual second speed change
 
* [[Part streaming assembly]] – this splits up into three sub processes – gantry robotics involved
 
* [[Part streaming assembly]] – this splits up into three sub processes – gantry robotics involved
 
* Final lockout at the macroscale
 
* Final lockout at the macroscale
  
= List of shown stations (discussed in more detail) =
+
= More in depth discussion =
 +
 
 +
== List of shown things in the first half (zoom-in) ==
 +
 
 +
The continuous zoom-in is nice. Attempting to give a sense for scale. <br>
 +
For even better ways to do this see:
 +
* [[Intuitively understanding the size of an atom]]
 +
* [[Magnification theme-park]]
 +
* and maybe [[The speed of atoms]]
 +
 
 +
=== Macroscale [[resource cartridges]] ===
 +
 
 +
Yes, could be done that way, yes, but a power-bank form-factor might be more convenient. <br>
 +
(Or a plug to the [[global microcomponent redistribution system]].) <br>
 +
Also the lab setting is kinda funny. <br>
 +
One major point of this technology is that people would have these devices in their living-rooms or working-rooms (like photocopiers) <br>
 +
and in their backpacks like laptops. <br>
 +
See: [[Form factor of gem-gum factories]]
 +
 
 +
=== [[Cooling channels]] ===
 +
 
 +
Not much to say here I guess.
 +
Could and would be implemented by more advanced means then just passive tubes for cooling fluid. <br>
 +
See: [[diamondoid heat pipe]] and [[diamondoid heat pump]] <br>
 +
That (not being limited by viscosity) could and would integrate more into the [[assembly layers]] above. <br>
 +
Nothing of that is shown though.
 +
Just as energy and data systems are not shown at all.
 +
 
 +
=== [[Assembly layers]] ===
 +
 
 +
Maybe this is interpreting to much into how much thought went into this concept animation but <br>
 +
The thickest layer being the one with the smallest nanomachinery and further up layers with bigger nanomachinery getting thinner matches up perfectly with
 +
"[[deliberate slowdown at the lowest assembly level]]" something we probably want to implement to keep waste heat from [[friction]] in check and
 +
something we should be able to implement mainly thanks to "[[higher productivity of smaller machinery]]".
 +
 
 +
== List of shown stations (zoom-out) ==
  
 
{{wikitodo|add discussions of stations and associated screencaps}}
 
{{wikitodo|add discussions of stations and associated screencaps}}
  
== Sorting rotors ==
+
=== Sorting rotors ===
 +
 
 +
[[File:Pns-fmtsp - one of a series of sorting rotors.png|275px|thumb|right|A series of '''sorting rotors''' like this one purifying [[resource molecules]]. Here [[ethyne]] is concentrated and benzene is shown to be rejected.]]
  
 
"[[Sorting rotors]]" is the name used in [[Nanosystems]].
 
"[[Sorting rotors]]" is the name used in [[Nanosystems]].
Line 84: Line 127:
 
See discussion on the page: [[resource molecule sorting system]]
 
See discussion on the page: [[resource molecule sorting system]]
  
== Final transfer into machine phase ==
+
=== Final transfer into machine phase ===
 +
 
 +
[[File:Pns-fmtsp - final transfer to machine phase.png|279px|thumb|right|Wheel turns clockwise. [[Ethyne]] molecule gets captured bottom center. It will no longer get released into liquid or gas phase. This is the final transfer to [[machine phase]]. (This part seems like an especially crude and conceptual sketch).]]
  
 
This is not shown in a way that is well worked out at all. <br>
 
This is not shown in a way that is well worked out at all. <br>
Line 96: Line 141:
 
For the preceding [[resource molecule sorting system]] similar alternate approaches might make sense too.
 
For the preceding [[resource molecule sorting system]] similar alternate approaches might make sense too.
  
== Tooltip loading, Tooltip preparation, Carbon deposition (Tooltip unloading) ==
+
=== Tooltip loading, Tooltip preparation, Carbon deposition (Tooltip unloading) ===
  
 
Here basically some results of these paper are presented:
 
Here basically some results of these paper are presented:
Line 109: Line 154:
 
* [[List of proposed tooltips for diamond mechanosynthesis]]
 
* [[List of proposed tooltips for diamond mechanosynthesis]]
  
== Assembly line positioning stage ==
+
=== Assembly line positioning stage ===
 +
 
 +
[[File:AssemblylinePositioningStage.png|200px|thumb|right|Positioning stages on a conveyor chain.]]
  
 
See main article: [[Assembly line positioning stage]]
 
See main article: [[Assembly line positioning stage]]
Line 125: Line 172:
 
But few notice. In fact the positioning stages themselves can be easily miss one's attention since
 
But few notice. In fact the positioning stages themselves can be easily miss one's attention since
 
they are not explicitly mentioned in the animation videos narrative.
 
they are not explicitly mentioned in the animation videos narrative.
 +
 +
=== Omitted non-shown details ===
 +
 +
'''Attachment chains for the tool-tips and back-pressure rails:''' <br>
 +
A version that did not make it into the final video had these. <br>
 +
See second screen capture.
 +
 +
'''Tooltip positioning stage:''' <br>
 +
Designing rotational degrees of freedom causes some head-scratching. <br>
 +
Plus the preceding point was ditched. That may be the reason for why it is not shown. <br>
 +
{{todo|have a go at designing positioning stages for rotational degrees of freedom}}
 +
 +
'''Switch of attachment chain type:''' <br>
 +
There is a switch from one attachment chain type to another attachment chain type. <br>
 +
From the one with assembly line positioning stages to a plain one. <br>
 +
This is not narrated and easily missed. <br>
 +
There must be a mechanism doing that transfer.
 +
 +
'''Change of attachment chain speed:''' <br>
 +
Given this wikis assumption of [[deliberate slowdown at the lowest assembly level]] is correct, <br>
 +
then going up the [[assembly level]]s we need to speed up (in terms of distance per time not in terms of frequency). <br>
 +
This speedup step could be ...
 +
* ... combined with the preceding chain type switching step.
 +
* ... done separately.
 +
* ... combined with the later routing step. – But it is done so here in the later shown routing design. It does not change speed.
 +
 +
'''Early stage vacuum lockout:'''
 +
A pretty critical omission.
 +
The bigger the volume the harder it gets to maintain a good [[PPV]] vacuum.
 +
One could argue that [[seamless covalent welding]] is still not done so a lockout this early is pointless.
 +
Later in the video there is no second stage vacuum lockout (after [[seamless covalent welding]]) shown either though.
 +
Only macroscale vacuum lockout is shown at the very end of the video.
 +
Possibly a good design idea was missing at the time of creation.
 +
The perfectly sealing two piston vacuum lockout design design presented on this wiki may be an original. See: [[vacuum lockout]].
 +
 +
=== Routing station ===
 +
 +
This super-crude conceptual sketch is glaring too wasteful with space. <br>
 +
Although "there is plenty of room at the bottom" (as [[Richard Feynman]] said), this is a chip like context. <br>
 +
A real design would want to design things compcatly and cramp things together.
 +
 +
Furthermore gemstone nanoscale [[superelasticity]] is (braggingly) visually featured in the pickup mechanism (but not mentioned in the narrative). <br>
 +
Making use only of [[Van der Waals force]] (as doen in the positioning stage) would probably be sufficient (and smaller).
 +
 +
Given the speeds here might still be quite a bit under of the speeds that would result from [[scale natural frequencies]], it might be acceptable to have quite small turn radii. <br>
 +
Slamming parts without slowdown into walls at much higher speeds would cause energy dissipation by thermalization into phonons.
 +
 +
{{todo|Have a go at desingning a somewhat more realistic smaller routing station}}
 +
 +
Although this seems like one single mechanism it can be conceptually separated in pick-up and place-down. <br>
 +
Distribution-junction and merging-junction respectively. <br>
 +
This is a good place to add [[redundancy]] into the system ([[Nanosystems]] page 420 Figure 14.7.). <br>
 +
It's not mentioned in the videos narrative.
 +
 +
=== Mixed part type stream transport to the next assembly level (here next assembly layer) ===
 +
 +
This might go for quite a stretch given it needs to get out of the thick stack of the bottommost assembly level. <br>
 +
This being a long stretch is not shown in the video. <br>
 +
Splitup from many streams to one is also not shown.
 +
 +
=== Stream pickup mechanism ([[crystolecule presenter]]) ===
 +
 +
This really simple one degree of freedom mechanism is probably here in order <br>
 +
for the larger scale assembly mechanism to not to need to match up <br>
 +
its motion to the motion of the continuously running attachment chain.
 +
 +
'''Why does it not pick the parts via the (red colored) adapter palettes??''' <br>
 +
This means more one-off adapter designs. Something we really don't want. <br>
 +
* shown adapter palette design would require part turnaround
 +
* shown adapter palette design does not allow for part handover
 +
 +
{{todo|Have a go on a better adapter palette design}}
 +
 +
=== First programmable assembly robot ===
 +
 +
There are many many ways to do it. So all the details where entirely omitted. <br>
 +
Just look at the wild variety of RepRap 3D printers out there to get the variety. <br>
 +
High stiffness parralel type robotics are to prefer at this size scale though.
 +
 +
There is the same questin as before though:
 +
'''Why does it not pick the parts via the (red colored) adapter palettes??'''
 +
 +
=== NOT SHOWN second lockout and speed-change ===
 +
 +
Here after [[covalent welding]] is (mostly?) done may be the ideal place for perfectly sealing a vacuum lockout step. <br>
 +
Also another speed change may be in order.
 +
 +
=== Part streaming assembly ===
 +
 +
The shown design might help
 +
* in overhangs
 +
* different assembyl speeds at different locations ??
 +
* ??
 +
 +
The shown process splits up into three sub processes
 +
* streaming part presenter mill wheel
 +
* length extendable transport chain
 +
* final gantry robotics placement mechanisms
 +
 +
The conceptual polygonal wheels are likely a bad idea <br>
 +
due to [[Van der Waals force]] need in to rip off for every turn of a facet.
 +
 +
=== Final lockout at the macroscale ===
 +
 +
As mentioned before: There should be lockout steps before this late in the game. <br>
 +
Even worse there is no airlock shown. A macroscale perfectly sealing [[PPV airlock]] sounds challenging to say the least.
 +
 +
Without airlock every time the [[gem-gum factory]] is opened up it would fully flood with air (and dust/dirt) all the way into the tiniest nanoscale nooks and crannies.
 +
That would be a nightmare to get out again.
 +
Pumpout doen to to [[PPV]] vacuum (and even to in comparison crude UHV vacuum) is not a matter of just pumping at the top.
 +
That is due to free molecular flow behaving like a ballistic billard. Air molecules only hitting the walls not other gas molecules.
  
 
= Notes =
 
= Notes =
Line 132: Line 290:
  
 
= Related =
 
= Related =
 
+
* [[Block diagram of a gem-gum on-chip factory]]
 +
* [[Subsystems of gem-gum factories]]
 +
* '''[[Assembly subsystem]]''' – Related: [[Routing level]]s
 +
----
 
* [[Discussion of proposed nanofactory designs|Discussion of other proposed nanofactory designs]]
 
* [[Discussion of proposed nanofactory designs|Discussion of other proposed nanofactory designs]]
 
* [[Gemstone metamaterial on chip factories]]
 
* [[Gemstone metamaterial on chip factories]]
Line 139: Line 300:
 
* [[Advanced productive nanosystem]]s – Disambiguation page
 
* [[Advanced productive nanosystem]]s – Disambiguation page
 
* More generally: [[Advanced productive nanosystem]]s
 
* More generally: [[Advanced productive nanosystem]]s
 +
 +
= External links =
 +
 +
* '''Watch it here: [https://archive.org/details/NanoFactory Productive nanosystems: From molecules to superproducts (InternetArchive link)]''' <br>
 +
* {{wikitodo|Add a link to a version with English and German soft-subs, such that it can be played w.o. sound.}}

Revision as of 15:55, 7 February 2022

This article is a stub. It needs to be expanded.
Screen capture from the concept animation video: "Productive Nanosystems From molecules to superproducts" – Shown are several processing stages highly compressed into just one image. Visible is (1) ethyne purification stages (2a & 2b) final transfer of ethyne out of liquid or gas phase and into machine phase (3) loading of ethyne onto tooltips (4) Abstraction of a pair of hydrogen atoms (5) deposition of a pair of carbon atoms onto a cube shaped crystolecule under construction (6) transport of along the assembly line. A real design: (A) would have these processing stages much more spaced apart (B) would have the tool tips running on chains too (C) would have the molecule sorting stages and final transfer to machine phase worked out in much more detail
Here is an alternate scene that did not make it into the animation video. The tips are on belts for longer tip-tip encounter time. It seem to suffers from being a too compact design though leading to a few issues like: The polygonal wheels may cause Van der Waals force spikes, the hinge flexing graphene sheet connections seems questionable and the axles are cramped. (wiki-TODO: figure out what mechanosynthetic reaction is supposed to be demonstrated here)

This page is about the the conceptual animation video "Productive nanosystems: From molecules to superproducts".
Watch it here: Productive nanosystems: From molecules to superproducts (InternetArchive link)
To address the common immediate concerns see: Macroscale style machinery at the nanoscale

Other proposals for gem-gum factory designs that differ from what is shown in the here discussed video can be found on the page: "Discussion of proposed nanofactory designs".

(wiki-TODO: add screen captures to the detailed discussions)

Goals

Suspected goals of the concept animation video

The goals of this animation presumably where a balance of:

  • accurate depiction of concepts outlined in the book "Nanosystems" and tooltip chemistry papers
  • comprehensible depiction of concepts
    (not over designed over complicated – just giving a hint that there are plenty ways to do it)
  • keeping design effort manageable
  • show the most critical components worked out in most detail =>
    less critical components are worked out in much less detail
    they are mostly shown to give a whole system context

Goals of this discussion page

This page is about

  • a brief listing of the sequence of things shown in the video followed by
  • a bit more detailed in context discussion of the processing stations will then be given in dedicated subsections. Eventually illustrated with corresponding screen captures.

Discussion of processing stations that get to long will be factored out into dedicated pages that will discuss these ideas mostly outside the context of this concept animation video.

Brief listings

List of shown things in the first half (zoom-in)

Shown wile zooming in continuously:

Shown while zooming out is a list of processing stations.

List of shown stations (zoom-out)

Stations dealing with molecules and molecule fragments:

Stations dealing with crystolecules and bigger structures:

  • Assembly line positioning stage – pallets (adapter pallets)
  • NOT SHOWN IN PUBLISHED VERSION – attachment chains for the tool-tips and back-pressure rails
  • NOT SHOWNTooltip positioning stage
  • NOT SHOWN – switch of attachment chain type
  • NOT SHOWN – chain speed transition
  • NOT SHOWN – early stage vacuum lockout
  • Routing station (Distribution junction and merging junction)
  • Mixed part type stream transport to the next assembly level (here next assembly layer)
  • Stream pickup mechanism
  • First programmable assembly robot – details largely omitted
  • NOT SHOWN – second vacuum lockout – eventual second speed change
  • Part streaming assembly – this splits up into three sub processes – gantry robotics involved
  • Final lockout at the macroscale

More in depth discussion

List of shown things in the first half (zoom-in)

The continuous zoom-in is nice. Attempting to give a sense for scale.
For even better ways to do this see:

Macroscale resource cartridges

Yes, could be done that way, yes, but a power-bank form-factor might be more convenient.
(Or a plug to the global microcomponent redistribution system.)
Also the lab setting is kinda funny.
One major point of this technology is that people would have these devices in their living-rooms or working-rooms (like photocopiers)
and in their backpacks like laptops.
See: Form factor of gem-gum factories

Cooling channels

Not much to say here I guess. Could and would be implemented by more advanced means then just passive tubes for cooling fluid.
See: diamondoid heat pipe and diamondoid heat pump
That (not being limited by viscosity) could and would integrate more into the assembly layers above.
Nothing of that is shown though. Just as energy and data systems are not shown at all.

Assembly layers

Maybe this is interpreting to much into how much thought went into this concept animation but
The thickest layer being the one with the smallest nanomachinery and further up layers with bigger nanomachinery getting thinner matches up perfectly with "deliberate slowdown at the lowest assembly level" something we probably want to implement to keep waste heat from friction in check and something we should be able to implement mainly thanks to "higher productivity of smaller machinery".

List of shown stations (zoom-out)

(wiki-TODO: add discussions of stations and associated screencaps)

Sorting rotors

A series of sorting rotors like this one purifying resource molecules. Here ethyne is concentrated and benzene is shown to be rejected.

"Sorting rotors" is the name used in Nanosystems.

Possible critique points of what's shown in the animation:

Possible critique (1): "This has not been worked out in enough detail." – (not applicable when looking at additional work)
Well. Given this is a processing step of core importance there actually has been done more detailed work on this peculiar design problem. The results juts did not make it into the animation. Either for reasons-of-clarity or it may have been designed only after publication of that video.

Specifically an atomistic model of an acetylene sorting pump with the software Nanoengineer-1 was being designed.
See: Acetylene sorting pump – This was the biggest and most complex modeled diamondoid molecular machine element designed till 2021 (and going).

Possible critique (2): Potential critique points due to the integrated polyine rods:

  • possibly higher radiation damage sensitivity.
  • the component parts are possibly quite a bit more difficult to synthesize

Are there maybe alternative solutions that can do without polyine rods?
See discussion on the page: resource molecule sorting system

Final transfer into machine phase

Wheel turns clockwise. Ethyne molecule gets captured bottom center. It will no longer get released into liquid or gas phase. This is the final transfer to machine phase. (This part seems like an especially crude and conceptual sketch).

This is not shown in a way that is well worked out at all.
A system quite similar system to the sorting rotors (like acetylene pumps) might be the intention here.

An issue here might be that

  • on the fluid/gas phase side temperature must be high to prevent freezing.
  • on the machine phase side temperature may need to be cryogenic to prevent the not yet covalently bond molecules to come loose and poison the practically perfect vacuum.

If that indeed is an issue then a thermal difference may motivate stetching out that mast wheel to a chain over a macroscopic distances though a thermal isolation barrier. This wold be a quite different design approach. For the preceding resource molecule sorting system similar alternate approaches might make sense too.

Tooltip loading, Tooltip preparation, Carbon deposition (Tooltip unloading)

Here basically some results of these paper are presented:


  • The featured tool for di-carbon deposition is likely DC10c.
  • (wiki-TODO: find out which tool was demonstrated doing the hydrogen abstraction)

See also:

Assembly line positioning stage

Positioning stages on a conveyor chain.

See main article: Assembly line positioning stage

This is a positioning stage that is attached to each attachment chain link of the crystolecule mechamosynthesis assembly line. These stages allows for individual x,y,z positioning in a quite ingenious and minimalistic way.

This design is exploiting the peculiar physics of the nanoscale quite a bit. A lot of stuff is held together only by the Van der Waals force. The very same design at the macroscale would just fall apart to (thousands/millions/whatever) pieces (except all pieces where strongly magnetic in convenient directions – impractical)

This is a case where there is quite a bit of deviation of macroscale style machinery at the nanoscale. But few notice. In fact the positioning stages themselves can be easily miss one's attention since they are not explicitly mentioned in the animation videos narrative.

Omitted non-shown details

Attachment chains for the tool-tips and back-pressure rails:
A version that did not make it into the final video had these.
See second screen capture.

Tooltip positioning stage:
Designing rotational degrees of freedom causes some head-scratching.
Plus the preceding point was ditched. That may be the reason for why it is not shown.
(TODO: have a go at designing positioning stages for rotational degrees of freedom)

Switch of attachment chain type:
There is a switch from one attachment chain type to another attachment chain type.
From the one with assembly line positioning stages to a plain one.
This is not narrated and easily missed.
There must be a mechanism doing that transfer.

Change of attachment chain speed:
Given this wikis assumption of deliberate slowdown at the lowest assembly level is correct,
then going up the assembly levels we need to speed up (in terms of distance per time not in terms of frequency).
This speedup step could be ...

  • ... combined with the preceding chain type switching step.
  • ... done separately.
  • ... combined with the later routing step. – But it is done so here in the later shown routing design. It does not change speed.

Early stage vacuum lockout: A pretty critical omission. The bigger the volume the harder it gets to maintain a good PPV vacuum. One could argue that seamless covalent welding is still not done so a lockout this early is pointless. Later in the video there is no second stage vacuum lockout (after seamless covalent welding) shown either though. Only macroscale vacuum lockout is shown at the very end of the video. Possibly a good design idea was missing at the time of creation. The perfectly sealing two piston vacuum lockout design design presented on this wiki may be an original. See: vacuum lockout.

Routing station

This super-crude conceptual sketch is glaring too wasteful with space.
Although "there is plenty of room at the bottom" (as Richard Feynman said), this is a chip like context.
A real design would want to design things compcatly and cramp things together.

Furthermore gemstone nanoscale superelasticity is (braggingly) visually featured in the pickup mechanism (but not mentioned in the narrative).
Making use only of Van der Waals force (as doen in the positioning stage) would probably be sufficient (and smaller).

Given the speeds here might still be quite a bit under of the speeds that would result from scale natural frequencies, it might be acceptable to have quite small turn radii.
Slamming parts without slowdown into walls at much higher speeds would cause energy dissipation by thermalization into phonons.

(TODO: Have a go at desingning a somewhat more realistic smaller routing station)

Although this seems like one single mechanism it can be conceptually separated in pick-up and place-down.
Distribution-junction and merging-junction respectively.
This is a good place to add redundancy into the system (Nanosystems page 420 Figure 14.7.).
It's not mentioned in the videos narrative.

Mixed part type stream transport to the next assembly level (here next assembly layer)

This might go for quite a stretch given it needs to get out of the thick stack of the bottommost assembly level.
This being a long stretch is not shown in the video.
Splitup from many streams to one is also not shown.

Stream pickup mechanism (crystolecule presenter)

This really simple one degree of freedom mechanism is probably here in order
for the larger scale assembly mechanism to not to need to match up
its motion to the motion of the continuously running attachment chain.

Why does it not pick the parts via the (red colored) adapter palettes??
This means more one-off adapter designs. Something we really don't want.

  • shown adapter palette design would require part turnaround
  • shown adapter palette design does not allow for part handover

(TODO: Have a go on a better adapter palette design)

First programmable assembly robot

There are many many ways to do it. So all the details where entirely omitted.
Just look at the wild variety of RepRap 3D printers out there to get the variety.
High stiffness parralel type robotics are to prefer at this size scale though.

There is the same questin as before though: Why does it not pick the parts via the (red colored) adapter palettes??

NOT SHOWN second lockout and speed-change

Here after covalent welding is (mostly?) done may be the ideal place for perfectly sealing a vacuum lockout step.
Also another speed change may be in order.

Part streaming assembly

The shown design might help

  • in overhangs
  • different assembyl speeds at different locations ??
  •  ??

The shown process splits up into three sub processes

  • streaming part presenter mill wheel
  • length extendable transport chain
  • final gantry robotics placement mechanisms

The conceptual polygonal wheels are likely a bad idea
due to Van der Waals force need in to rip off for every turn of a facet.

Final lockout at the macroscale

As mentioned before: There should be lockout steps before this late in the game.
Even worse there is no airlock shown. A macroscale perfectly sealing PPV airlock sounds challenging to say the least.

Without airlock every time the gem-gum factory is opened up it would fully flood with air (and dust/dirt) all the way into the tiniest nanoscale nooks and crannies. That would be a nightmare to get out again. Pumpout doen to to PPV vacuum (and even to in comparison crude UHV vacuum) is not a matter of just pumping at the top. That is due to free molecular flow behaving like a ballistic billard. Air molecules only hitting the walls not other gas molecules.

Notes

The page on this wiki that is associated is: Gemstone metamaterial on chip factories
The page "Advanced productive nanosystems" is more generally about all kinds of proposed advanced manufacturing systems (more and less feasible) that go into the direction of gem-gum technology.

Related



External links