Difference between revisions of "Connection method"

From apm
Jump to: navigation, search
(added advanced macroscale semimanual connection method concept graphic)
(moved graphic into the appropriate section)
Line 1: Line 1:
[[File:Advanced_semimanual_macroscale_connection_method.svg|200px|thumb|right|A concept for an advanced macroscale connectiion method that could become possible with advanced [[technology level III|gem-gum technology]]. <br>(bottom) Two parts are roughly brought into the intended contact location and orientation by hand. (center) Small machinery on surfaces does the remaining fine alignment. (top) Small machinery on surfaces "fuses" the parts together via strong interlocking. Dirt may be tolerated (dotted line) or expelled (two fatter black dots).
 
]]
 
 
Connection methods in advanced diamondoid atomically precise technology ([[technology level III|systems]] and [[further improvement at technology level III|products]]) can differ quite a bit from conventional connection methods.
 
Connection methods in advanced diamondoid atomically precise technology ([[technology level III|systems]] and [[further improvement at technology level III|products]]) can differ quite a bit from conventional connection methods.
  
Line 71: Line 69:
 
Thus '''the classical nail and screw design probably makes no sense at the nanocosm''' ('''To investigate:''' in-how-far is this statement true?)
 
Thus '''the classical nail and screw design probably makes no sense at the nanocosm''' ('''To investigate:''' in-how-far is this statement true?)
  
= Kinds of connection mechanisms tat are typical for a specific scale =
+
= Kinds of connection mechanisms that are typical for a specific scale =
 
+
[[File:Advanced_semimanual_macroscale_connection_method.svg|300px|thumb|right|A concept for an advanced macroscale connectiion method that could become possible with advanced [[technology level III|gem-gum technology]]. <br>(bottom) Two parts are roughly brought into the intended contact location and orientation by hand. (center) Small machinery on surfaces does the remaining fine alignment. (top) Small machinery on surfaces "fuses" the parts together via strong interlocking. Dirt may be tolerated (dotted line) or expelled (two fatter black dots).
 +
]]
 
* <1nm - single covalent bonds
 
* <1nm - single covalent bonds
 
* <1nm...typical:32nm...<1µm -- matching surfaces full of open radicals (densely packed -> irreversible connection)
 
* <1nm...typical:32nm...<1µm -- matching surfaces full of open radicals (densely packed -> irreversible connection)

Revision as of 14:38, 28 August 2017

Connection methods in advanced diamondoid atomically precise technology (systems and products) can differ quite a bit from conventional connection methods.

Depending on the size of the observed chunk of product one can find different kinds of connection mechanisms. On the biggest scale advanced self aligning and self cleaning interfaces are possible. On smaller scales down to the physical limit there can be found:

  • interlocking structures
  • surfaces perfectly matching the shape of their conter-faces sticking togetherby VdW force
  • shape locking mechanisms
  • and finally covalent bonds between atoms
    the simplest most compact physical structures that one can built that hold things together.

To be able to do recycling efficiently and fast it is necessary to make the connection mechanisms at the smallest scales reversible. e.g. the energy stored in a snap connection must be gently recollected instead of being suddenly released in a "click" sound. If this is not done great amounts of waste heat are produced need to be removed.

Connection methods can be split into three classes:

  • energy barrier locks
  • hierarchical locks
  • friction locks

(TODO: Improve this article, add info-graphics)

The different methods to lock building blocks into place

Energy barrier locking (soft)

In the macro-scale springs, magnets, gravitation, and almost unused electrostatic attraction belong to this class.
In the nano-scale springs, VdW-force (Van der Walls attraction), chemical bonds and in some cases electrostatic attraction are well usable.

There thermal movement can knock a lock open by probabilistic chance which must be taken under consideration in system design. Energy barriers high enough to effectively prevent opening by chance can be easily reached. [Todo: add VdW math example; add more details]

All other locking methods do too display energy barriers but have other more predominant traits.

Van der Waals locking

See: Van der Waals force for details. Comparing the VdW interaction with covalent bonds can give a better intuitive feel for VdW interaction forces.

Although two coplanar atomically flat surfaces attract each other quite a lot (Values and comparisons on the "Van der Waals force" page) they can still slide effortlessly along each other (possibly superlubricating) so depending on the use indents may be needed to prevent that. (intuitive feel)

Van der Waals forces can be used to do self assisted assembly (which is a weaker form of self assembly aka brownian assembly). When assembling a hinge one does not need to plug the axle in actively and fix it in place with e.g. a locking snap-ring. Instead the axle gets sucked in as soon as its hold over its sleeve. One gets it out again by pushing with a blunt tool. This simplifies assembly a lot. Less manipulator complexity and less positioning precision (and thus stiffness) is needed.

For the tiniest assemblies counting only a handful atoms locking will be necessary since there are an Avogadro number (~6*10^23) of parts so some will thermally self disassemble if the probability for this is extremely but not astronomically low. The probability P for thermal self disassemly of parts sicking together with energy E quickly becomes astronomically low as can be seen by the formula: P = e^-(E/(kT)).

[todo: add image]

Form locking

Main article: Form locking

Hierarchical locking

Something is hierarchical locked when one has to remove a part such that a locking part can be removed. The structure can be disassembled only in a specific order. Hierarchically locked structures can have tree shaped topologies.

Related: Expanding ridge joint

Friction

Nails and screws base their locking ability on friction but in advanced atomically precise products one usually finds super-lubrication between surfaces. Also thermal motion is regularly knocking everything loose.

One can design surfaces such that they perfectly intermesh but this would effectively create a series of energy barriers (energy barrier locking) in which the barrier after the first one won't have much use (linear instead of exponential decrease of accidental disassembly probability). Furthermore the energy might be not well recoverable (non-stiff hydrogen bonds dissipate power) leading to unnecessary waste heat. Thus the classical nail and screw design probably makes no sense at the nanocosm (To investigate: in-how-far is this statement true?)

Kinds of connection mechanisms that are typical for a specific scale

A concept for an advanced macroscale connectiion method that could become possible with advanced gem-gum technology.
(bottom) Two parts are roughly brought into the intended contact location and orientation by hand. (center) Small machinery on surfaces does the remaining fine alignment. (top) Small machinery on surfaces "fuses" the parts together via strong interlocking. Dirt may be tolerated (dotted line) or expelled (two fatter black dots).
  • <1nm - single covalent bonds
  • <1nm...typical:32nm...<1µm -- matching surfaces full of open radicals (densely packed -> irreversible connection)
  • >32µm...typical:1µm...open-end -- reversible interlocking structures
  • >1µm...typical:1mm...open-end -- high level self aligning and dirt expulsing interfaces

[Todo: add image]

The locking nature of screws

  • mechanical advantage
  • self-retention by friction

Examples for various combinations of locking types

  • snap buckles: pure energy barrier locking - zero hierarchical levels
  • snap ring: hierarchical locking of at least one but most of the time two layer
  • door handle mechanism: hierarchical locking of one layer (with retention of the locking part)
  • ...

Related

External references

  • further information: Nanosystems chapter 9.7 Adhesive interfaces