Acetylene sorting pump

From apm
Revision as of 14:34, 5 July 2021 by Apm (Talk | contribs) (Related: added link to yet unwritten page about * Pumps)

Jump to: navigation, search
A proposed acetylene sorting pump. Design by Eric Drexler, Josh Hall, Mark Sims and Ninad Sathaye – NanoEngineer-1.
A detail of the pump model. The worm gear drive at the top.
Same detail but see through. A discussion about such worm drives is on the page: Examples of diamondoid molecular machine elements.

An acetylene sorting pump (or ethyne sorting pump) is a proposed form of "Sorting rotors" to filter the potential resource molecule ethyne (aka acetylene) to ultra high purity for further processing.

Since sorting rotors or (something equivalent in function) are a core critical component of the proposed far term target of gem-gum factories, these where investigated in a bit more detail than other system parts.

Specifically an atomistic model of an acetylene sorting pump with the software Nanoengineer-1 was created. This was the biggest and most complex modeled molecular machine element designed so far (at time of writing 2021). It contains several structural crystolecules that are combined in a way that allows complex relative motions in a superlubricating way (no snapback).

(wiki-TODO: Check if the the original molecular data for this model can still be attained. There seems to be only one low resolution screen-capture left on the web.)

Some discussion of design aspects

The acetylene sorting pump is a larger diamondoid machine element (DMEs). The frame is one big monolithic crystolecule (it may be fused together via seamless covalent welding during assembly). Other parts are smaller independent crystolecules that may be mechanosynthesized fully passivated as a whole and integrated as a whole without any seamless welding.

Critical aspects of the semi diamondoid parts of the design

The ethyne molecules need to want to go into (and through) the narrow supply channels. In other words a lower energy state is desired within the supply channels. Has this been analyzed or simulated? Nanoscale channels can sometimes cause some odd effects like high temperature freezing. If ist works. How efficient can this be made? How low of an energy drop is sufficient for molecules being transported efficiently?

What about binding energy the specificity of the binding pocket (CO2 is somewhat similar in shape and size) – there probably where investigations

Possible critique points (for this specific proposed design):
Due to the integrated ethyne rods:

  • possibly higher radiation damage sensitivity.
  • parts possibly quite a bit more difficult to synthesize

Interesting aspects of the diamondoid parts of the design (less critical)

(wiki-TODO: Find out if there was some reasoning behind gearing down an how much.)

Possible alternatives (for this specific proposed design)

Are there alternative solutions?
Without the rods pushing the molecules out of the pockets actively it may be doable via thermal means. The issue here though is that: (1) Big thermal differences should equate to big (macroscopic) spacial distances stretching out the design massively. Big distances allow for good thermal insulation and thermal energy recuperation. (2) There are several purification stages to go through. So this long distance needs to be bone through several times back and forth.

Related



In the concept animation video Productive Nanosystems From molecules to superproducts
the acetylene sorting pump system is the very first step shown and visualized in a very simplified way
(cross section exposing polyyne rods)